Latest activity
-
RRoger_tech posted the thread Tantalum capacitors Vs. Aluminium capacitors for synchronous switching converter input pin. in Power Electronics.I'm using the LM5166 (Fixed 5V) version, the data sheet suggests to use a tantalum or aluminium capacitors for the input capacitor. The...
-
VVictorZhang_PCB replied to the thread Pad size too small..Check if Pad 1 is actually a pad or a copper zone Click directly on that large red shape and look at the bottom status bar — it will...
-
-
Delta Prime replied to the thread Ultra-Low Power and Long-Range Design of LoRa Modules.I would agree with you but in doing so we would both be wrong. -
Martaine2005 replied to the thread Ultra-Low Power and Long-Range Design of LoRa Modules.:) -
Delta Prime replied to the thread Ultra-Low Power and Long-Range Design of LoRa Modules.Sure if you wanna blinking LED Several kilometers away! Do you have a question? Data rates are often in the hundreds of bits per second...
-
ilianaboone posted the thread Ultra-Low Power and Long-Range Design of LoRa Modules in General Electronics Discussion.In IoT projects, engineers often face a dilemma: achieving long-range communication typically requires high power, leading to soaring... -
ilianaboone posted the thread How Does LoRa Mesh Self-Organizing Network Technology Achieve Ultra-Long-Distance Coverage? in General Electronics Discussion.In environments such as large campuses, farms, or underground utility tunnels, traditional point-to-point LoRa communication often...
-
Jjonas123 replied to the thread Which MCU do you prefer — ESP32 / STM32 / RP2040 / Arduino?.My quick pick by use case are: IoT & Wireless → ESP32 Industrial Embedded → STM32 Learning & Creativity → RP2040 Fast DIY Prototypes →...
-
SStefanjack replied to the thread Setting up a Common Anode Dual LED with one reference point..Your approach can work, but the main issue is that a 10k pull-up usually won’t provide enough current to properly drive the NPN...
-
Mvery old thread closed
-
davenn replied to the thread Thrustmaster T300 main board USB Issue.very old thread closed -
-
MMarkees replied to the thread Thrustmaster T300 main board USB Issue.Is it mayby possible to just hotwire the pin 1/3 and pin 2/4 together with just a wire? Would that work? Or myby i need to do something...
-
-
