Latest activity
-
Mmechanic_ replied to the thread ECU repair.I have tried to heat the ECU a little bit with a heat gun to check if it has bad solder somewhere, but didn't fix it.
-
Mmechanic_ replied to the thread ECU repair.@danadak @narkeleptk I don't have spark, no fuel pump relay clicking, can't connect to diagnostics, and I have no 5V reference on the...
-
Delta Prime reacted to Harald Kapp's post in the thread JK Flip-Flop Toggles Twice from One Button Press with
Like.
very much likely insufficient debouncing possibly, but not necessarily definitely Here's a comprehensive text on debouncing. -
Doubt that you get more than a few hundred volts at 60Hz, which likely is not enough to go through the hair to skin of most animals...
-
There is also the later version, used at present on modern auto's, the primary is isolated from the secondary, know as waste spark versions.
-
Delta Prime reacted to Martaine2005's post in the thread Cat door sensor jammed by steel (metal) enforced wall with Like.
Yes, metal can effect radio waves of RFID. It can disrupt and de-tune the radio signal. Plastic will form a barrier.
-
This might help ...
-
https://tahmidmc.blogspot.com/2013/01/using-high-low-side-driver-ir2110-with.html
-
You could use two pulse voltage sources operating in anti-phase, e.g. one switching between 0V and 5V while the other switches between...
-
Delta Prime replied to the thread Comedy Thread.
-
-
Sshrtrnd replied to the thread Fixing Bosch Dishwasher that can't turn on.The problem might not be in the power or control boards. Check the obvious alternatives also. Switch that senses when the dishwasher...
-
For the oldies: -
Ddanadak replied to the thread help with IR2110 chips.This might help ...
-
Jjonas123 replied to the thread help with IR2110 chips.At those voltages and switching conditions, layout and grounding can become just as important as the IR2110 itself. Long gate traces...
-
SSandWiz reacted to crutschow's post in the thread Cat door sensor jammed by steel (metal) enforced wall with Like.
The plastic is just to provide more space between the sensor and the metal wall. It does nothing by itself otherwise to block the...
