Latest activity

What's new New posts New showcase items New showcase comments New resources Latest activity
  • narkeleptk
    narkeleptk replied to the thread Anyone identify this connector?.
    shim and hot glue or kapton tape is the way to go.
  • narkeleptk
    narkeleptk reacted to Harald Kapp's post in the thread Anyone identify this connector? with Like Like.
    Before soldering, You can try this hack. Insert the Cable: Carefully slide the ribbon cable into the FPC connector. Shim the Cable: Cut...
  • M
    mechanic_ replied to the thread ECU repair.
    Thanks man.
  • M
    mechanic_ reacted to narkeleptk's post in the thread ECU repair with Like Like.
    It probably should be around 200 to 300 mA with RUN applied. Seeing only a few milliamps supports my original post that it is not waking...
  • narkeleptk
    narkeleptk replied to the thread ECU repair.
    It probably should be around 200 to 300 mA with RUN applied. Seeing only a few milliamps supports my original post that it is not waking...
  • M
    mechanic_ replied to the thread ECU repair.
    Hello Bertus. Already checked. Its not short ciruited. Thank you for reply. :)))
  • M
    mechanic_ replied to the thread ECU repair.
    Here is the picture of my ECU.
    • 1780249889908.png
  • M
    mechanic_ replied to the thread ECU repair.
    I have identified the 12V supply and grounds. I also found the K-line. The ECU has constant 12V, ignition 12V, and three ground pins. I...
  • M
    mechanic_ replied to the thread ECU repair.
    I don't have an ESR tester, but I'll try to buy one in the near future. I checked all the capacitors using a multimeter in capacitance...
  • M
    mechanic_ reacted to narkeleptk's post in the thread ECU repair with Thanks Thanks.
    Considering the symptoms, it sounds like the ECU is completely offline. I've never worked on one of those here in the States, but it...
  • M
    mechanic_ reacted to danadak's post in the thread ECU repair with Thanks Thanks.
    Per chance do you have a low V Capacitor checker ? They apply a couple 100 mV level of AC and look for ESR, and exceedingly low ESR is a...
  • narkeleptk
    narkeleptk replied to the thread ECU repair.
    Considering the symptoms, it sounds like the ECU is completely offline. I've never worked on one of those here in the States, but it...
  • D
    danadak replied to the thread ECU repair.
    Per chance do you have a low V Capacitor checker ? They apply a couple 100 mV level of AC and look for ESR, and exceedingly low ESR is a...
  • M
    mechanic_ reacted to danadak's post in the thread ECU repair with Thanks Thanks.
    Also if you can get access to a good optical inspection scope look at soldering, amazing how much stuff made with marginal solder...
  • M
    mechanic_ reacted to narkeleptk's post in the thread ECU repair with Thanks Thanks.
    What are your issues with car and what is it that you suspect the ecu is doing/not doing?
Show older items
Top