Latest activity
-
Delta Prime replied to the thread Found problem in Kenwood KR-V95R.Replace with two 6800 microfarad capacitors connected in series which will cut the capacitance value in half and will equal 3400uf. -
Llucassilva posted the thread Preserving Legacy Console Hardware and Firmware – Best Practices? in General Electronics Discussion.Hi everyone, I've recently been reading more about the challenges of preserving older gaming hardware, especially consoles from the...
-
Cchiahead replied to the thread Found problem in Kenwood KR-V95R.I very much hope that only the thread is dead, not the posters.
-
No. there hasn't been any interest in this thread for the past 4 years -> closed. -
davenn replied to the thread Is this true? Diamond battery. Cool.yeah, all garbage :( thread closed
-
-
I doubt that this is anywhere possible. A diamond is indeed a great land made stone, but a radioactive capacitor or voltage storage it...
-
Yup, definitely leakage. Parts in question are on the schematic pdf page 34 of 54.
-
Delta Prime reacted to bidrohini's post in the thread JK Flip-Flop Toggles Twice from One Button Press with
Like.
This sounds very much like switch bounce reaching the clock input. A JK flip-flop will respond to clock edges, so if the button produces... -
Bbidrohini replied to the thread JK Flip-Flop Toggles Twice from One Button Press.This sounds very much like switch bounce reaching the clock input. A JK flip-flop will respond to clock edges, so if the button produces...
-
Cchiahead replied to the thread Found problem in Kenwood KR-V95R.Greetings from Minnesota, I just acquired the same unit with the exact same issues - leaked C43,C44, C46, D22 is gone + the black wire...
-
Martaine2005 replied to the thread Is this true? Diamond battery. Cool.I doubt that this is anywhere possible. A diamond is indeed a great land made stone, but a radioactive capacitor or voltage storage it... -
Jjulietteyates replied to the thread POT burning/candle-like smell.Bringing this one back up because I'm curious if anyone has tried different brands or types of potentiometers for similar setups? Would...
-
HHaxby replied to the thread 3-phase 380V inverter with EGS031 and EGP3000W boards.Thanks @robmar for your work and clarification. It's amazing that this thread is 9 years old but still active. I have been playing with...