Latest activity
-
Luke11 posted the thread Have you encountered space-constraint issues in your latest wearable device projects? in General Electronics Discussion.When your PCB real estate is extremely tight, leaving no room even for a conventional USB port. Beyond the main MCU solution, you also... -
Luke11 reacted to Jason Hogan's post in the thread DIY Geiger Counter – Looking for Feedback on the Schematic and PCB Design with
Like.
A few practical pointers from building 400V GM tube boards: HV Ground & Copper Pours: Do NOT pour ground planes directly underneath... -
Luke11 reacted to Martaine2005's post in the thread Can devices be charged without a charging port? with Like.
Then the answer to your question is obviously yes!
-
Martaine2005 replied to the thread Burned traces repair help needed.You can use bare wire. The traces and connections are not insulated. Be mindful of bending the wire where the original track was... -
FFredHedgecoth replied to the thread Burned traces repair help needed.I had told him that I had disassembled everything and the board was ready to work on but I think he was just pricing the job high to...
-
Martaine2005 replied to the thread Burned traces repair help needed.That depends. If it’s a half hour strip down, half hour repair and half hour reassembly, that’s probably not bad. But for a few jumper...
-
FFredHedgecoth replied to the thread Burned traces repair help needed.BTW, a tech quoted me $150 to do the repair. Would you say that was about right?
-
Martaine2005 reacted to FredHedgecoth's post in the thread Burned traces repair help needed with Like.
Agreed…a shame to toss but my skills are lacking and the space is pretty tight as well. I’ll hang on to the unit and maybe give it...
-
FFredHedgecoth replied to the thread Burned traces repair help needed.Agreed…a shame to toss but my skills are lacking and the space is pretty tight as well. I’ll hang on to the unit and maybe give it...
-
Martaine2005 replied to the thread Burned traces repair help needed.Such a shame as it would have been an easy fix providing nothing else was fried. Look at the component side and reference designators...
-
PPeterLushman1234 reacted to geo98's post in the thread How to Program Renesas Audio Processor without Datasheet available with Like.
R2A15218FP is identical to R2A15220FP, both in the internal structure and in the command. The input selector is a little different. The...
-
FFredHedgecoth replied to the thread Burned traces repair help needed.Thanks…but I’ve given up on this project. My soldering skills are weak and my patience level is apparently near zero. I hate scrapping...
-
davenn reacted to danadak's post in the thread Same voltage but is the current output different? with Like.
Compare the datasheets : https://www.jauch.com/downloadfile/5ef1edcfd15cf1c9921d36c851eb4c34f/cr2032.pdf... -
This manual might help...
-
Ddanadak replied to the thread Burned traces repair help needed.This manual might help...