Oneeye_IO
-
Posts
6 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Posts posted by Oneeye_IO
-
-
Hi again
I've found this -> http://www.jaknato.cz/konstrukce/teplomer.htm . If you say that you can't measure voltage on the same power supply, how does this thermometer work ? There is no other power supply for transistor PN junction. It's everything in one. I just only need to know if it's possible to make circuit which can measure itself? I want to make thermometer with LM35DZ sensor (same ground and voltage from power supply as -
Hi One Eye,
This is a fairly complicated variable voltage and variable current well-regulated supply.
You don't need regulation for your driller. Do you need its voltage to be adjustable to control its speed?
I only need 18V and no adjusting. I'll set it and leave it on 18V -
Hi all.
I have one simple question. Is this http://www.electronics-lab.com/projects/power/032/index.html -
Go back to page 1 of this thread and read all of the posts. There were changes made and since there are two different schematics on the site, I am not sure which one was corrected. Click on the links posted. Read the posts and make changes accordingly.
MP
Thanks, I'll try to find something usefull.
So why didn't you move the right schematic to the projects pages ? ??? -
Hi
I tried to build digital voltmeter but it doesn't work :'( . I tried two ICl 7107 and it still doesn't work. I have never do anything with CMOS ICs so a I don't know if the IC is bad. ??? . I have done it on test board with schematic from http://www.electronics-lab.com/projects/test/014/ .
Everything is feeded by old AT PC voltage supply.
Only change I've done is change of 2K trimmer for 2k5 trimmer because I can't buy 2K trimmer
Led display Digital Voltmeter question
in Projects Q/A
Posted
I made updated circuit yesterday and it works :) . Now I have one little problem. Why the shown voltage is 50* larger than input voltage ? I can reduce it with 1K trimmer but it still shows 40* larger value of voltage at trimmer minimum.