xxmonkey321xx
-
Posts
8 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Posts posted by xxmonkey321xx
-
-
crap...
Well.. any ideas? I really need an _easy_ way to step up the voltage :/
Or if not I guess I could deal with slower fans, they make less noise :D
Anyone got any ideas? Your gonna have to put them into noob terms, I really have very little knowledge of higher-lever circuitry. Thanks :D -
but then I would have ~15 volts going into my fan when the potentiometer is all the way on?
-
I decided to use the -5v as my com along with the 12v to give me 17v, and cut it down with a resisitor to 14v
Thanks for all your help guys!! -
Hmmm.... any ideas anybody? This kinda puts a damper on this project :/
-
Thank you!
How would I get 14 volts out of the 12 volts that my power supply gives me? -
I recently made this 12v DC fan controller, and I have a couple of questions..
1) For the capacitors, is 1000uF too much? When I plug it into my computer I think it draws too much power for a second, effectively killing my 12v rail.. I can hear the hard-drive electromagnet deactivating :/
2) Does the LM317T require a heatsink? It doesnt seem to get hot at all after a minute of use..
3) Both Capacitors are electrolytic, is that ok?
4) Would 50uF Capacitors work?
5) Are Axial Lead capacitors teh same as electrolytic capacitors?
Thanks in advance,
Monkey
12V Fan controller
in Electronic Projects Design/Ideas
Posted
Really I think that is way too much stuff to do for just a fan controller.. haha
I'll just stick with ~10v on my fans :D
Thanks SO much for all your help guys!