amlovingyou

I couldn't configure the XBee modules. details given below, anyone pls help... Transmitter: Restore default parameters: ATRE Set transmitter destination address: ATDL = 0x1234 Set transmitter source address: ATMY = 0x5678 Set D0 as analog input: ATD0 = 2 Set D1 as analog input: ATD1 = 2 Set D2 as analog input: ATD2 = 2 Set D3 as digital input: ATD3 = 3 Set D4 as digital input: ATD4 = 3 Enable pull up on digital inputs D3 and D4: ATPR = 0x03 Set sample rate to 100ms: ATIR = 0x64 Write parameters to non-volatile memory: ATWR Receiver: Restore default parameters: ATRE Set receiver destination address: ATDL = 0x5678 Set receiver source address: ATMY = 0x1234 Set receiver input address: ATIA = 0x5678 Enable uart output: ATIU = 1 Set P0 in order to drive the RSSI LED according to signal strength: ATP0 = 1 Write parameters to non-volatile memory: ATWR

can you please explain the tilt mouse application in step by step... ??? (http://www.electronics-lab.com/projects/sensors/009/index.html)