- Birthday March 19
This article is automatically translated by google translate, just for reference.Chinese version PDF please CLICK HERE.Low voltage DC powerPart 3: Electromagnetic compatibility(EMC)GB This section 21560 specifies the power level does not exceed 30 kW,an input AC or DC input voltage is not more than 660 V,the DC output voltage does not exceed 250 V power source of various means(PSU)of the electromagnetic compatibility(EMC)requirements.Power supply means operate independently, or other devices installed in adequate electrical and mechanical protection are -for some special industrial applications (e.g. chemical and metallurgical) power supply apparatus used, there may be other products EMC standards. At this time, perform this section may also perform those products EMC standards ^many of the power supply apparatus is as relating to different EMC used part of a large apparatus standards, following a) and b)show power classification and EMC scope standards. A detailed breakdown of the power supply, see Appendix A.Expected power (a separate instrument)independentThis section applies to the power supply means as a unit and having a direct function of development, especially in a separate unit on the market"Component supply be divided into two operation:the power supply member regarded as of the instrumentPresent part deemed suitable instrument (e.g., intended for the facility or sold to the public) part of the power supply device,which EMC by the instrument equirements considered for use without additional prepended EMC tests. this does not include a maintenance spares sales the power supply device, which has been carried out as a member of the test machine"Is intended for professional assembly / installer component supplysection applicable to this kind of power, but help to meet different standards for the relevant end product EMC requirements. such parts supply is expected. these products may be sold by the end of tantalum professional installation personnel who install terminal products to professional assemblers, or delivered to wholesale markets. in both cases, the user of the end product is not only to fulfill its own responsibilities. after assembly further assumed that EMC testsNote:the power supply device member people end product, emission value Can be changed (e.g. due to changes in the ground conditions).Purpose of this section is to define the power supply EMC and test methods for limits device,comprising one thousand possible interference to other electronic devices (e.g., a radio receiver, a measuring device and a computer apparatus) electromagnetic emission limits, and a continuous, transient conduction disturbance and radiated disturbances (including electrostatic discharge) immunity electromagnetic limits.this part of the predetermined minimum power supply device EMC requirements.comply with this section, no require additional EMC tests, nor beyond the portion of the necessary.2 normative documentsReferences the following are incorporated by GB reference in this section 21560, constitute provisions of this section. dated references, which then All amendments (not including errata content) or revisions do not apply to this section, however, encouraged to whether the latest versions of these documents are part of the parties to this agreement. undated references, the latest version applies to this 2900. 33-2004GB / T part.term Electrical power Electronics 60050- (IEC 551: 1998 and IEC 60050-551- 20: 2001, IDT)D 2900. The term electromagnetic Electrotechnical 60-2002(eqvIEC 60050-121: 1998) GB / T semiconductor converter of basic requirements(eqvIEC 60146-1-1: 1991) GB 4343. 1 electromagnetic compatibility appliances, electric tools and similar apparatus Part 1: Emission (CISPR 14 ~ 1: 2000,term & Electrotechnical electromagnetic compatibility (IEC 60050-161: 1990, IDT)industrial, scientific and medical(ISM)radio disturbance characteristics limits apparatus and methods of measurement(CISPR 11: 20〇3,16113.1-GB / T DT)1995 radio disturbance and immunity measuring apparatus specificationsGB 9254, -1998 limits and methods of measurement harassment radio information technology equipment(IDTCISPR 22: 1997) GB / T General Requirements 1 and 2000 detects a calibration laboratories(IDT ISO / IEC 17025: 1999)GB/ T 16935.1-1997 with the insulating first part of low-voltage systems: principles, requirements and tests(IDTIEC 60664-1: 1992) GB / T low voltage DC power supply of the performance apparatus to be (IEC 61204: 2001, MOD)electromagnetic compatibility limits for harmonic current emissions (equipment input current<16 a) (IEC 61000-3-2:electromagnetic compatibility limit of having a rated current 16 a voltage the device= in the low-voltage supply system fluctuations and flicker in limit(idtIEC 61000-3-3: 1994) GB / T electromagnetic compatibility test and measurement techniques electrostatic discharge immunity test(IDTIEC 61000-4- 2:. 1995) GB electromagnetic compatibility test and measurement techniques RFEMS Test(idt 1 EC 61000-4-3: 1995)electromagnetic test and measurement techniques compatible with fast transient electrical pulses immunity test CianIEC 61000-4-4-.1995) GB / T electromagnetic compatibility testing and measurement techniques surge (impact) immunity test( idt IECS 1000-4- 5: 1995) GB /test the electromagnetic compatibility and radio frequency field measurement techniques conducted disturbances, induced immunity(IDTIEC 61000-4-6! 1996) GB / T Electromagnetic compatibility Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunitytests(idt 61000-4-11: 1994)IEC60〇5 IEC-131 billion International Electrotechnical dictionary(IEV)Part 131: Circuit theory60050-151 IEC International Electrotechnical dictionary(IEV)Zi section 151: electrical device and a magnetic device3 and the terms definedGB / T 2900.33. GB / T /,/ T 3859.1 GBand IEC60050-151 is defined given as well as the following definitions apply to this section.Tambient environment1. 1residential environments residential environmentis directly connected to all domestic low-voltage power supply utility facilities. Protection from 10 ni,about the size of the room.3.1 + 2commercial and light industrial environment, commercial and light industrial environmentare not necessarily all connected to a common low-voltage power supply and light industry commercial facilities. The desired status broadcast radio and television receivers use, protection the distance of 10can be m or 30 m.1.3Industrial environment industrial environmentis not directly connected to a common low-voltage power supply of industrial facilities, large houses due PROTECTION distance 30 m.3.2protection zone protection distancefrom the electronic or electrical devices. Within this distance, the interference level should not affect the use, such as broadcast radio and other electronic or electrical device such as a television receiver.3.3Distribution System distributed power systemby the power distribution bus to supply power to a fixed power converter system.3.4port portProduct-specific interfacewith an external electromagnetic environment.Examples of ports:input cross Su port DC input«U the ground port13.4.port of the housing enclosore portPhysical interface power supply device products. Emitting an electromagnetic field through which the mount of the power supply device or invasion by products.3.4.2signal or control line port signal or control line portprovides diagnostic or low power level control information is input or output port.3.4.3DC input port dc * input power portconnected to external DC power supply port.3.4.4DC output port dc Output power portDC power output port connected to the outside.3.4.5AC input port Sapporo c. Input power portterminal connected to external AC power supply U.3.5Power(device)power supply; PSUthe input electrical energy into one or more output power of the electric or electronic device.3-5.1Power member component power supplya modular power supply device modular PSU The power supply device sub-unit sub-unit PSUfor providing or changing the electrical energy from the electrical means and / or the electronic device thereof. They are not expected to operate independently, by a professional assembly / installation personnel charged with the end product.Read more... GBT-21560-3-2008-Low-voltage-power-supplies-DC-output-Part-3-Electromagnetic-compatibility(EMC).pdf
Anybody could help?
Hi everyone, I'm Jacob Cheng from China, working in an electronic instrument manufacturer, and this is not a promotion content, I'm here asking for help.As a freshman of marketing promotion in the electronic instrument, I have no idea about what topic will engineers interested in. So, I'm here today to ask for a little favor from an expert like you guys, sincerely.We manufacturing digital DC power supply, frequency converter, all kind of power testing equipment the most. For example, the frequency converter, use to simulate power network for product testing. Then you wanna know about this machine, what you want to ask? Here is some of my thinking: What's the feature of this machine? (compare with general model） Compare with XXX brand, what' the result? What's the power core? What's the capability between different core? What material made of? That decided how long I could use it. Anything else comes up?I know I maybe ask a stupid question, but I really need help, please leave your comment, thank you, guys. Here is the sample page: https://www.octatronics.com/products/fc115kva