Jump to content
Electronics-Lab.com Community

eagle drawing(SOIC to DIL socket 8pins)


Recommended Posts

i use eagle to draw my schematic(SOIC to DIL socket 8pins)
the chip holder now i have is a normal 8pins holder...for the ic chip(74xx).
i want to do like this

i create a schematic..edit>add>atmel>attiny15L>then i add another one IC package DIL-8(i don't wats different between DIL8 and DIL8S)...am i right?then i just connect the pin1 of ATTINY to pin1 of DIL8....is it?
THANKS for your help!!


Link to comment
Share on other sites

i connect all the pins already.then i click to make the schematic into board.the then i click autoroute,i received the result..all 0.00%.the board look does't change after autoroute.but i want the length of the pins are equally.like the 123.jpg image i post.if i just use the tools(wire)to connect it,all the connection are different.how to make it nice look??
what is the following step i can do??
i want to print it on transparency and fabbricate it.

Link to comment
Share on other sites

i can't attach the file from eagle...
i copy and paste into paint..
after i autoroute the board..this result comeup
EAGLE AutoRouter Statistics:

Job : C:/Program Files/EAGLE-4.13/projects/New_Project_1/untitled.brd

Start at : 09:28:26p ( 9/26/2004)
End at : 09:28:27p ( 9/26/2004)
Elapsed time : 00:00:00

Signals : 9 RoutingGrid: 50 mil Layers: 2
Connections : 6 predefined: 6 ( 0 Vias )

Router memory : 24768

Passname : Route Optimize1 Optimize2 Optimize3 Optimize4

Time per pass : 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00
Number of Ripups : 0 0 0 0 0
max. Level : 0 0 0 0 0
max. Total : 0 0 0 0 0

Routed : 0 0 0 0 0
Vias : 0 0 0 0 0
Resolution : 100.0 % 100.0 % 100.0 % 100.0 % 100.0 %

Final : 100.0% finished

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...