bryce10110 Posted August 17, 2009 Report Share Posted August 17, 2009 I built the dual voltage power supply (http://www.electronics-lab.com/projects/power/039/index.html). But i made it 15 volts not 12 volt (7915 and 7815). But the output is 20 volts. Im stumped Quote Link to comment Share on other sites More sharing options...
audioguru Posted August 17, 2009 Report Share Posted August 17, 2009 The original circuit does not work. The transformer's voltages are too low.The 18V center-tapped transformer has peak voltages of plus and minus 12.7V. The rectifier drops it to 12V and the ripple in the main filter capacitor drops it to only 11V at a 1A load. Then the 12V regulators and your 15V regulators will not work.The 12V regulators need an input of at least 14.5V and your 15V regulators need an input of at least 17.5V.Sigh. Every project from this author is wrong.You need a 28V or 30V center-tapped transformer for your 15V regulators to have enough input voltage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.