Jump to content
Electronics-Lab.com Community
Sign in to follow this  
ced

ngspice transfer function

Recommended Posts


Hi,
I am a ngspice newbie and I'd like to get a frequential transfer function of a Wien filter
as an exercise .
I'd like to plot V(3)/ISRC versus frequency .

Here is the .sch file I simulate :

Tranfer function
ISRC 1 0 AC 1
R1 1 2 1k
C1 2 3 1u
R2 3 0 1k
C2 3 0 1u
.AC DEC 10 1 10K
.END

Here is the result I get :

ngspice 1 -> run
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000

Warning: Source isrc has no value, DC 0 assumed

Warning: singular matrix: check nodes 1 and 1

Note: starting dynamic Gmin stepping
Trying gmin = 1.0000E-03 Note: One successful Gmin step
Trying gmin = 1.0000E-04 Note: One successful Gmin step
Trying gmin = 1.0000E-05 Note: One successful Gmin step
Trying gmin = 1.0000E-06 Note: One successful Gmin step
Trying gmin = 1.0000E-07 Note: One successful Gmin step
Trying gmin = 1.0000E-08 Note: One successful Gmin step
Trying gmin = 1.0000E-09 Note: One successful Gmin step
Trying gmin = 1.0000E-10 Note: One successful Gmin step
Trying gmin = 1.0000E-11 Note: One successful Gmin step
Trying gmin = 1.0000E-12 Note: One successful Gmin step
Trying gmin = 1.0000E-12 Note: One successful Gmin step
Warning: singular matrix: check nodes 1 and 1

Warning: Dynamic Gmin stepping failed
Note: starting source stepping
Supplies reduced to 0.0000% Warning: singular matrix: check nodes 1 and 1


Trying gmin = 1.0000E-02 Note: One successful Gmin step
Trying gmin = 1.0000E-03 Note: One successful Gmin step
Trying gmin = 1.0000E-04 Note: One successful Gmin step
Trying gmin = 1.0000E-05 Note: One successful Gmin step
Trying gmin = 1.0000E-06 Note: One successful Gmin step
Trying gmin = 1.0000E-07 Note: One successful Gmin step
Trying gmin = 1.0000E-08 Note: One successful Gmin step
Trying gmin = 1.0000E-09 Note: One successful Gmin step
Trying gmin = 1.0000E-10 Note: One successful Gmin step
Trying gmin = 1.0000E-11 Note: One successful Gmin step
Trying gmin = 1.0000E-12 Note: One successful Gmin step
Note: One successful source step
Supplies reduced to 0.1000% Warning: singular matrix: check nodes 1 and 1

Supplies reduced to 0.0000% Warning: singular matrix: check nodes 1 and 1

Warning: source stepping failed

AC operating point failed -

Last Node Voltages
------------------

Node Last Voltage Previous Iter
---- ------------ -------------
1 0 0
2 0 0
3 0 0

doAnalyses: iteration limit reached

run simulation(s) aborted

Does someone has an idea about what's wrong in the scheme file ?
Thanks for your help,
ced

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...