Guest ronvais Posted March 13, 2013 Report Share Posted March 13, 2013 hey,i want to make a small project and communicate with my circuit through usbthe project should check some sensors and move stepper motors by the program rules.i got this week my programmer for the controller and went over the datasheet of the controller i got, it doesn't seem hard to get the usb port to listen or writebut the problem comes from the other side: i searched google all last night but i didnt found how to program using .net or mathlab and write and read from the usb port.can any one refer me to information on programming to usb port??? :-\ Quote Link to comment Share on other sites More sharing options...
Guest buzzelectrician Posted March 29, 2013 Report Share Posted March 29, 2013 hi this is a useful book to readget through for oncehttps://www.delcomproducts.com/downloads/USBPRGMNL.pdfSpam link removed by moderator Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.