Jump to content
Electronics-Lab.com Community

Reading 2 digit 7 segments with ESP32


Recommended Posts

I have been trying to contact a forum member that has done a modification to his pool equipment in order to control it remotely instead of having to go to the box every time and check on the codes. His has released the source code on his github page.

However, I have a different model than he does so I do not think his ESP32 code will work on mine.

His equipment contains a TM1650 for the 2 digit 7 segment display. I am unable to find out if my version has the TM1650 or something else.

His schematic looks like this: enter image description here

enter image description here

I have all the components that are displayed in the schematic. I have the ESP32 and the Level shifter.

enter image description here

Another forum member had the same chip but some pins were different. His schematic looks like this: enter image description here

So, since I do not have the same setup as they do is there any IC I can get that would make reading the 2 digit 7 segments easier than trying to read each led and determining what letter/number is being displayed? I can use the 4n25/35 optocoupler to "press" any of the 6 buttons and have an analog read for the 8 LEDs to determine which ones of those are on. The only trouble I foresee is the 2 digit 7 segments reading.

Note: Also posted to the following forums:
Link to comment
Share on other sites

So I'm looking at my version of the ESP32 that I have (Known as the Lolin32)

 
proxy.php?image=https%3A%2F%2Fwww.electro-tech-online.com%2Fattachments%2F1652416286050-png.137070%2F&hash=6e702f492df36a5f343b13cd8ebf6b15



And looking at their schematic I see that they call out GPIO 16, 17, 18 & 19. However, I do not have the same pin layout as they do...Go figure...
- GPIO 19 -> SWG main board clock
- GPIO 18 -> SWG main board data
- GPIO 17 -> Display board clock
- GPIO 16 -> Display board data

proxy.php?image=https%3A%2F%2Fwww.electro-tech-online.com%2Fattachments%2F1652414673058-png.137068%2F&hash=23220865d17cedaa65a90487d61b7484



So, I take it my layout would be:

GPIO 19 -> GPIO 19 MISO
GPIO 18 -> GPIO 18 CLK
GPIO 17 -> GPIO 17 TX
GPIO 16 -> GPIO 16 RX

That look correct?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...