Martaine2005's latest activity
-
-
Fursday Funny
-
Martaine2005 replied to the thread Ultra-Low Power and Long-Range Design of LoRa Modules.:)
-
Martaine2005 replied to the thread BLUETOOTH ANTENNA.I think that it’s possible to add an external antenna. Cut the PCB antenna traces to eliminate it and use either a SMA or U.FL...
-
Martaine2005 reacted to bertus's post in the thread The position reading from the driver keeps jumping. with
Like.
Hello, A flexible coupling will always have slack. The ones with those plastic or rubber pieces will have more slack than the ones of... -
Martaine2005 replied to the thread The position reading from the driver keeps jumping..I’m no expert by any stretch of the imagination but I would first try a rigid coupler rather than a flexible one.
-
Hi ya the connector has been destroyed. There should be a strip that goes the length of the connector over the top of those contacts...
-
Martaine2005 replied to the thread Splitting and re connecting LED string lighting.I still don’t understand how you achieved this. I’m glad it worked out well for you though. Have you added more LEDs or simply...
-
Martaine2005 reacted to Merton69's post in the thread Splitting and re connecting LED string lighting with Like.
Thank you All for your responses. For your information, I merely cut the wires, stripped back the sleeving and soldered together the...
-
The replacements bulged straight away ? 1) You may have put them in the wrong way around 2) the power rails that they are across has...
-
Martaine2005 replied to the thread Part Identification.That PDF is only a photo.
-
Martaine2005 replied to the thread Part Identification.Not being able to see the traces properly, it appears that the two (2) resistors across the gate and source are possibly pull downs to...
-
Martaine2005 replied to the thread Hi. I have a parkside PLG 20 C3 charger that has completely stopped working..This is getting ridiculous. Almost word for word identical to post #4. Are these AI?
-
Martaine2005 replied to the thread Need help in reverse engineering this power failure alarm circuit.If you’re talking about the blue cylindrical component, that’s not a capacitor. It’s an inductor.
-
Martaine2005 reacted to zillah's post in the thread Multimeter stopped displaying after replacing battery with Like.
Agree Looks okay I will do that no other choice Regards