Search results

  1. Alec_t

    Price versus quality

    Even if you find a suitable pot, how stable is your power source supplying the pot? It would need to vary by no more than 1 part in 500.
  2. Alec_t

    Can someone suggest me an upgrade for my car that doesn’t require any wire cutting or voids insurance and warranty, but still gives an excellent econo

    Welcome to maker.pro! I suspect that if any workable device that met your conditions had been invented it would already be incorporated in existing vehicles or at least would be widely available on the market. Beware of snake-oil salespeople.
  3. Alec_t

    Forward reverse switch HELP!

    Those controller specs are fine for that motor, but the DC current rating of the switch is not specified and its AC current rating is marginal.
  4. Alec_t

    Forward reverse switch HELP!

    What is the current rating of the controller? If it is less than 3.1A then it is probably going into self-protect mode when it tries to start the motor (which has a 3.1A stall current rating).
  5. Alec_t

    Forward reverse switch HELP!

    Welcome to maker.pro. 1) What are the rated full speed current and stall current of that motor? 2) I see no DC rating for the switch, so it may not be happy if motor stall current exceeds an Amp or two.
  6. Alec_t

    Help Modifying Constant Current LED Driver from 700mA to 400mA

    If it were a variable resistor you could tweak it slightly and check to see if that affected the LED current. If it were a voltage reference then there would perhaps be a comparator for comparison of that voltage with the voltage dropped across a LED current sensing resistor. Changing that...
  7. Alec_t

    Fixing the Circuit for a DC Motor with Rechargeable battery?

    The batteries are probably past their useful life and may have been damaged by a faulty charger.
  8. Alec_t

    Need Help Repairing a 2 wire heating element on Electric Composter

    Do you know the Wattage of the heating element? Do you have a multimeter?
  9. Alec_t

    Help Modifying Constant Current LED Driver from 700mA to 400mA

    Is VR2 a Variable Resistor or a Voltage Reference source?
  10. Alec_t

    LED lamp goes "poof"

    Good to know it's now working.
  11. Alec_t

    LED lamp goes "poof"

    Don't think so. I'd guess it's there to discharge the cap safely in the event of the current-limiter IC failing open-circuit.
  12. Alec_t

    Loud pop on transducer switch

    What power supply do you have? How are you switching the board on/off? Are you switching just the audio channel, or just the supply, or both?
  13. Alec_t

    Hyundai seatbelt alarm bell.

    What has all the above got to do with a seatbelt (per your thread title)?
  14. Alec_t

    Design help to control electromagnetic

    Could you mount something above the raft to push it down? Welcome to maker.pro!
  15. Alec_t

    What is this? Radio?

    Is the round thing with four connecting pins on the back a bulb/light of some sort? Xenon flash tube?
  16. Alec_t

    Component repair

    Welcome to maker.pro! The three-legged item is most like;y a Hall effect sensor. What are the markings on it?
  17. Alec_t

    Temperature Control using DHT11 and arduino

    Can you amend your thread title? The present one is misleading.
  18. Alec_t

    Sound transmission laser

    Welcome to maker.pro. You will need to provide a lot more information regarding exactly what is in your numbered boxes. For example, does the laser pointer include a constant current or constant voltage control circuit? What are the transformer characteristics? What input signal level does your...
  19. Alec_t

    small motor fishing line keeps snapping

    Try braided multi-filament line.
  20. Alec_t

    Schematic question ...

    What do you mean? Trigger what? The bulging cap is defective and should be replaced.
Top