Search results

  1. 6

    Noisemaker Revenge Machine

    Ah, forget it. This is dead. It was not good to begin with, pump was working but not outputting air. Liquid went inside. But I have another new one. I wonder if it can work.
  2. 6

    Noisemaker Revenge Machine

    No I don't mean with the outputs. I can figure out which one is going to motor and power by following the cables. Last 2 wires are for LED. I am afraid about amperage. Wouldn't I damage the motor if I supply 1A instead of 3A? Conversely, damage the board if it is 1A and I supply 3A? I think I...
  3. 6

    Noisemaker Revenge Machine

    Thanks Martin for all the help. I will order 2 and take to an electronics shop. What is the chance of burning the motor with a wrong move? I only need the smaller motor. I also have another device. a 12V, 1A adapter supplies power. Specs specify 12V, 0.5A. It has an air pump with an adjustable...
  4. 6

    Noisemaker Revenge Machine

    Let's not discuss this as I have not disclosed any facts, so whatever you think or voice your opinion about is just speculating.
  5. 6

    Noisemaker Revenge Machine

    Ok Martin, universe has a way of paying back good deeds. Appreciated.
  6. 6

    Noisemaker Revenge Machine

    I can't take your time like this. I don't mean no disrespect, I know it is an enthusiast forum, but I can offer some money to compensate the time you spend for me.
  7. 6

    Noisemaker Revenge Machine

    The device has 2 modes: Vibration and hammer. Bigger motor is vibration. With remote buttons, you can choose between the modes. You can also mix them. You can also increase/decrease intensity. I found that this just increases the frequency of hitting for example. You can also adjust time...
  8. 6

    Noisemaker Revenge Machine

    https://imgur.com/a/iOzkYno
  9. 6

    Noisemaker Revenge Machine

    0.0-2.8 volts DC. It fluctuates. I put it back, but if required I can take it apart to read.
  10. 6

    Noisemaker Revenge Machine

    Do you want me to put the probes into the terminals on the white connector box on the PCB? Would orientation matter (+/-)?
  11. 6

    Noisemaker Revenge Machine

    I do.
  12. 6

    Noisemaker Revenge Machine

    Here is the PCB:
  13. 6

    Noisemaker Revenge Machine

    You helped me with my dead battery! It did not work :) I took to the shop and they could not make it work either with some other batteries. There is no writing on motors. Keep in mind that I have no electronics experience. So it is all greek to me.
  14. 6

    Noisemaker Revenge Machine

    Martin how are you doing? We did some Kanger exercise together! We are tortured 3 years, buddy. Some animal rented above us. I have exhausted all civilized options. Here is a video of the device: https://cloud.video.taobao.com/play/u/2207851258939/p/1/e/6/t/10301/289263742822.mp4 Big motor is...
  15. 6

    Noisemaker Revenge Machine

    I have this device. It vibrates and knocks. It works well. The problem is that this has some remote. After powering it on, you must press POWER on the remote, then press a program button for it to start. But what needs to be done for this to start automatically when powered on? Can this done...
  16. 6

    Can you help me revive a dead battery?

    No there are not plenty of places to do that where I am. If there was, I would not be bothering with this myself.
  17. 6

    Can you help me revive a dead battery?

    I tried with 12V charger as well but no go. It is not increasing much. I will take it to a shop to see if they can replace the batteries. I want to thank Martin for all the help!
  18. 6

    Can you help me revive a dead battery?

    I have 7.15 volts but no go. It is not charging as before.
  19. 6

    Can you help me revive a dead battery?

    How do you want me to repack? I am trying to not remove them from their sleeve in order not to introduce problems later on. I don't know how to pack it. If someone to sell the same battery, I would have purchased it. I am looking, looking, but I am not finding it. They are 18550 LiPo...
  20. 6

    Can you help me revive a dead battery?

    Martin, what is the volts I am aiming at? Can't I keep doing it like this? It is increasing a bit. Do I leave hte connector connector to PCB?
Top