Search results

  1. ante1

    free energy motor

    Perhaps it
  2. ante1

    Monitor Problem

    If your monitor has a second input connector of some kind you can try another input source. This way you can establish if the problem has to do with the input or not.
  3. ante1

    UPS Problem

    Ok, you got it. Here are all APC diagrams I have available! I hope one of these will help you find the problem.
  4. ante1

    newbie question

    A zener diode might work for low currents and low stability requirements but an LM7805 (there are many others too) will supply more current and high stability!
  5. ante1

    free energy motor

    I thought this forum was about technical stuff not religion, not that I have anything against religion but it does not mix well! All I got to add here is: marcoz, I wish you where correct about these things believe me! But, you are way off and you have nothing with substance to prove any of...
  6. ante1

    troubleshooting Kolin TV

    Try to find out where the power from this transistor goes, you will probably find a shorted capacitor, diode or something else busted.
  7. ante1

    hydroxy gas power supply/separating oxygen and hydrogen from water

    Hi Steven, Very neat arrangement, it looks like you got you
  8. ante1

    Monitor Problem

    If you
  9. ante1

    UPS Problem

    Hi john, Is this IRF740 working solo or is it paralleled with more 740
  10. ante1

    Headlight Flasher

    If you mean a circuit diagram; No, I don
  11. ante1

    Help! Connecting power supply to small load/solenoid

    You know 3.6 Ohms is not a short! A solenoid is an inductor. What sort of power source do you use?
  12. ante1

    Running DC motor from battery pack

    The problem isn
  13. ante1

    Allen Bradlet SLC500 programalbe Controller HELP

    Well that
  14. ante1

    Latching Device

    Hi Mike, Some motors have a self-inhibited gear which means you can
  15. ante1

    Headlight Flasher

    I believe a relay will have a very short life in this application. A Mosfet must be dimensioned to cope with the load you
  16. ante1

    Speedometer Sensor

    You could attach a small tacho to the cable and convert the output to suit the circuit. Or you could use a small inductive sensor to count the rpm
  17. ante1

    power inverter

    Hi phil, With a 12VDC input I would not recommend outputs of more than 1.5kW since the input current (>1000A) will be to high to deal with. As I see it there are two ways to accomplish this, a dynamic converter (easier for three phase) or a higher DC voltage preferably 120V or more.
  18. ante1

    Help! Connecting power supply to small load/solenoid

    The solenoid must have no less than the calculated amperage to work as intended and it will grab this current when the correct voltage is available. No, that
  19. ante1

    light detecting sensors

    I might be confused but it sounds like you are trying to make a mechanical shading of a lamp. I can
  20. ante1

    Speedometer Sensor

    How is the original speedo arranged on your bike?
Top