Search results

  1. ante1

    very simple PS

    Ok AG, great I like to see who I'm talking to you know!  ;D
  2. ante1

    Pump protection circuit

    Hi Steve, The current sensing could be kept simple by using a low value resistor in series with the pump motor wiring. Some experimenting will reveal suitable threshold values (voltage drop) where to switch the pumps off and on. You probably need to make some delays (analogue or digital) for...
  3. ante1

    Plessey ZN416E AM Receiver

    The ZN414Z and the ZN416E has been obsolete since at least the early nineties! You will be very lucky to find one of those! I believe the only chance you
  4. ante1

    New here, problem with a certain part..

    Hi fuz, If you bypass it there is no filtering of the power but if the power source is
  5. ante1

    very simple PS

    Hi walid, Of curse, the schematic you posted indicates a
  6. ante1

    very simple PS

    Hi Guys, Perhaps it should be mentioned that the forward drop is actually 0.8V at 200mA (like in this app) and increasing to 1.1Volts at 1A. AG; What happened to $crooge?
  7. ante1

    New here, problem with a certain part..

    Hi fuz, I believe that is the power input filter you are referring to? It is actually two parallel inductors with a common core. Perhaps this type might be used for signal inputs too. Parts from EPCOS shouldn
  8. ante1

    Pump protection circuit

    Hi Steve, I think we need to know more details to give you a more precise circuit. From what you give us I would sense the decreasing current to switch over to the second pump and if required even shut the second one down when it runs dry.
  9. ante1

    52" RCA big screen - no power Service Manual Needed

    Hi John, I suppose the problem is the projector is missing one color? Are the tubes leaking?
  10. ante1

    Fiber Optics

    Fibre optics is also used to control IGBT
  11. ante1

    Momentary switch

    A 4-way which looks just like a standard toggle on top is not easy. Unless you could see some markings to identify an old one its hard to find. Here are a few examples to look at. This is a (normal) small one: http://www.etisystems.com/j1.asp Here is a really small one...
  12. ante1

    Hall effect sensor bypassing?

    Most likely this is a switching sensor not a linear one!  Sensonic?
  13. ante1

    Big Archive ebook,manual,vs....no rapid

    Hard work typing in books in Babble-fish I think!  :P Some translator software could work but not for scanned books I am afraid! :-\
  14. ante1

    Big Archive ebook,manual,vs....no rapid

    Hi Doc, I agree, this is an absolute goldmine, if you know Russian! I browsed trough the books and magazines to find a bunch of EPE magazine in English but nothing else! I found many interesting books but in Russian which is too bad! Perhaps I need help to navigate to the 80% of the titles...
  15. ante1

    inverter

    My car has a 1.7kW alternator but I am sure you could find larger than that so I don’t think there would be any problems. At least not at engine rpms greater than 3000!
  16. ante1

    infrared help

    I don’t believe it’s possible to change the wavelength and the problem is most likely that these are to narrow banded to communicate. Try to hook up a scope to see if there are any changes in voltage at all.
  17. ante1

    Opamp

    The LMH6672 can provide 200mA.
  18. ante1

    12vdc heating element

    You need to have the oil inside the injectors heated too, or the engine won’t start! The system described by Ldanielrosa will work fine but do not forget to switch over to diesel again some time before you stop the engine!
  19. ante1

    problem with my notebook pls anybody help

    Your problem might be some virus, mal-ware or spy-ware. Update your antivirus software, scan your computer and also try Ad Aware to get rid of any malicious files. Firefox will not cure this problem!
Top