Search results

Search Forums New Posts
  1. Arouse1973

    Electronic Principles Home Work

    Hi Andrew What is the 6*10^4? Do you think that should be -4? Thanks Adam
  2. Arouse1973

    How to convert a z-value from gyroscope sensor to degrees per second

    You will have to decode the data produced in digital format SPI or I2C. Why don't you see if you can find a device that produces an analog output proportional to angular rotation. Thanks Adam
  3. Arouse1973

    Hello Geeks !!

    Hi Sam, welcome to EP, nice to see you here. Look forward to your questions. Thanks Adam
  4. Arouse1973

    How to convert a z-value from gyroscope sensor to degrees per second

    What Gyro are you using, do you have a datasheet? Adam
  5. Arouse1973

    Hi, new electrician from Belgium.

    Hi Andy, welcome. A basic electronics book is always a good place to start. Have a look on Amazon, they have lots. Start of with the basics and go from there, ask lots of questions if you are not sure, the worst thing is not being able to progress because you don't get the missing link, so ask...
  6. Arouse1973

    LED project.

    I have built some hardware, now for the software. I have added a speed POT and a dimming POT I thought the dimming POT might be useful. Thanks Adam
  7. Arouse1973

    Benchtop PWM Generator

    Let us know how you get on with it. I would go for the DEV board that does what you want it to do, having an area to add other components is always handy if they have this. Thanks Adam
  8. Arouse1973

    No output from power supply

    Here is a manual for the dual type, I bet they use the same circuitry :) http://www.ko4bb.com/manuals/81.155.155.49/Tek_PS280-283_Service_Manual_Schematics.pdf Thanks Adam
  9. Arouse1973

    Circuit that sends 1 pulse when input goes high, 2 pulses when input goes low

    Yes he would of done it, I miss him too. Adam
  10. Arouse1973

    Circuit that sends 1 pulse when input goes high, 2 pulses when input goes low

    oh yeah duuuh.
  11. Arouse1973

    Circuit that sends 1 pulse when input goes high, 2 pulses when input goes low

    And pulse width. Thanks Adam
  12. Arouse1973

    Need assistance with positive resist pcb please

    I was thinking the same thing, are the PCBs old. I guess the only way to tell is to buy a new PCB and try that. Thanks Adam
  13. Arouse1973

    Need assistance with positive resist pcb please

    What are you using to make the resist layer. The dark coloured parts? Cheers Adam
  14. Arouse1973

    Powering my IC

    Hello David. Use a 5 volt regulator. Let me know if you need help finding one. Thanks Adam
  15. Arouse1973

    Hii Everybody

    Hello welcome to EP. Hope you enjoy it, nice to see you here. Thanks Adam
  16. Arouse1973

    Very basic Q! Potential divider or Wheatstone for load cell

    Use an Op-amp, that's all you need. Thanks Adam
  17. Arouse1973

    Arbitary waveform generator using a micro-controller

    Use the DAC function if they have one. If not get one that does. Adam
  18. Arouse1973

    Trying To Determine Potentiometer Needed For Grizzly G8691 Lathe

    Found this site. I know they are in the UK but it might be worth sending them an email. http://www.amadeal.co.uk/acatalog/Potentiometer-AMA_SP_CJ18_157.html#SID=189 Cheers Adam
  19. Arouse1973

    Benchtop PWM Generator

    Hi Fish If you want to build a bench top generator have a look at this DDS IC. You can generate Square, PWM, sine and triangle waveforms. http://www.analog.com/media/en/technical-documentation/data-sheets/AD9833.pdf Thanks Adam
  20. Arouse1973

    Audio Circuit too sensitive

    Hi Digger Can you find out if the POT is linear or logarithmic? The use of a linear POT instead of a log pot could be the cause. Cheers Adam
View older results
Top