Search results

Search Forums New Posts
  1. Martaine2005

    Akai plasma 60" picture looks like a lava lamp sound still good

    Sounds like a problem with the Z sustain board. But the fact that you still have sound, it's more likely the Y sustain board. As for not powering off...Unplug it from the mains and try a reboot. Does it respond to the remote? Both the boards should have fuses, so you could check those first...
  2. Martaine2005

    voice module help please

    Yes, I just read my post above and am confused too..o_O BobK and Harald Kapp explained it in English.. Probably should have read 'using the added amp as a load' (speaker). All amplifiers should always have a load, invariably the speaker. If the speaker is removed the amp will easily be...
  3. Martaine2005

    Material detecting sensor(s) system.

    Hey jjoll, would I be right in thinking this could be homework?
  4. Martaine2005

    Need help identifying this component ...

    Hmm......Martin....masculine.
  5. Martaine2005

    Need help identifying this component ...

    Oops, forgot to say the ' Ex Spurt' will give you the info on those......:cool:
  6. Martaine2005

    Need help identifying this component ...

    There you go steveb. An expert has told you.
  7. Martaine2005

    voice module help please

    Hi Mandalorian, and Harald Kapp. Do you mind if I ask a question? Mandalorian, you have connected an amplifier to an amplifier and to the original speaker. Do you know what Ω's the original speaker and amp is.? Secondly, amplifying an amplified signal will play havoc. You are basically using...
  8. Martaine2005

    12vdc Pulse Timer

    Hi Hochstrasse, not sur I have heard of that before...Do you mean a 12volt auto turning indicator? Sorry about that, you know us across the pond are are little slow....
  9. Martaine2005

    Material detecting sensor(s) system.

    Yellow washing up gloves flashed in my mind..
  10. Martaine2005

    Need help identifying this component ...

    I could......But Toyota ones don't work on Ferrari's...:rolleyes: Lovely looking cars. I hope you can revive this beauty.. Martin.
  11. Martaine2005

    Material detecting sensor(s) system.

    Hi jjoll, have a look at this video.. It is quite informative. It will give you an idea how it's done 'large scale'. Then work out which way you want to begin your project. Martin.
  12. Martaine2005

    Need help identifying this component ...

    I am not 100% sure they are resistor networks, except they look very similar. I couldn't find any reference to the markings. I even checked the LOGO resourse section on this forum. Somebody on here will know for sure.. If they are, I can make you some for Ferrari prices of course..:)
  13. Martaine2005

    Need help identifying this component ...

    Hi, they could be resistor networks.
  14. Martaine2005

    led lamp assembly help

    Think we just posted at the same time.... If they worked and now they don't, something has blown. As they are in series, if one led blows the others wont work. Try your 3v on individul leds on the boards.
  15. Martaine2005

    led lamp assembly help

    Has the lamp got a seperate pcb? Apart from the led strips. Is there a model number for the lamp? Sure you are using 12v from the atx including polarity?
  16. Martaine2005

    led lamp assembly help

    @Harold Kapp, Perhaps Colin was refering to this..3 leds..resistor..3 leds Martin.
  17. Martaine2005

    Portable Strobe Battery Pack.

    Hi Eric, The inverter would more than likely be fine, as a little extra headroom would avoid thermal shut down. The sealed battery would have to be trial and error I think..Due to flash and inverter running off the battery. Perhaps a 12AH to start and do some testing on how long it lasts...
  18. Martaine2005

    How do you not run outta batteries?

    Hi atxjess, the 4 c batteries are 1.5 volts each. You need to add up all batteries voltages and it will give you the circuits running voltage. Yours has 4 c batteries. Each battery is 1.5 volts. times that by 4 = 6. So your cicuit requires 6 volts. You can buy a 6 volt DC adapter from any...
  19. Martaine2005

    ADE7816 Calibration

    Hi, It generally frowned upon to have the same post on different forums. Especially 4 minutes apart.. http://www.edaboard.com/thread339121.html It is good practice to wait 24/48 hours for a reply. But some forums have active members and answer questions within a smaller time frame. Martin.
  20. Martaine2005

    Audio device ground hum

    Somebody will be along to assist you..
Top