is there a DC converter that can do this?
We have a 12V battery on an excavator and need +24V DC outputs for our control
computer, various servo-valve amplifiers and some of our pressure sensors (total
current requirement is around 30A for short periods of time, but for the most part,
total current requirement is below 10A). We are already using a 12V-24V DC converter,
however it only has a +24V DC output.
We also have a signal conditioning card that needs both +24V and -24V DC power input,
each with respect to a common ground which would be the frame of the excavator) - this
card processes outputs from an inductive position sensor, with a small current
requirement (0.1 A at the very most).
Is there a DC converter from 12V-24V, preferably 30A max output. Even a converter with
max 0.2A, will do.
We have a 12V battery on an excavator and need +24V DC outputs for our control
computer, various servo-valve amplifiers and some of our pressure sensors (total
current requirement is around 30A for short periods of time, but for the most part,
total current requirement is below 10A). We are already using a 12V-24V DC converter,
however it only has a +24V DC output.
We also have a signal conditioning card that needs both +24V and -24V DC power input,
each with respect to a common ground which would be the frame of the excavator) - this
card processes outputs from an inductive position sensor, with a small current
requirement (0.1 A at the very most).
Is there a DC converter from 12V-24V, preferably 30A max output. Even a converter with
max 0.2A, will do.