Inductive Proximity Sensor using TCA505

[ral8452]

are  there gerbers, or actual pcb's , available for this design, and -- more specs on the coil made here, resistance, diameter, current , etc

 

[Rajsbom]

This inductor is made using POT Core, value Approx. 640uH to 680uH will work, current could be 100mA, 

you may try Drum Core Coil from Mouser Part No 80-SBCP-80HY681H

https://www.mouser.in/ProductDetail/KEMET/SBCP-80HY681H?qs=pfd5qewlna7zBsC5r9mWjg%3D%3D

Or you may make one using POT Core, Value approx. 680uH , Current 100mA or less 

https://www.digikey.com/catalog/en/partgroup/p-core-type/50202

 

[Pliked]

This inductor is made using POT Core, value Approx. 640uH to 680uH will work, current could be 100mA, 

you may try Drum Core Coil from Mouser Part No 80-SBCP-80HY681H

https://www.mouser.in/ProductDetail/KEMET/SBCP-80HY681H?qs=pfd5qewlna7zBsC5r9mWjg%3D%3D/

Or you may make one using POT Core, Value approx. 680uH , Current 100mA or less 

https://www.digikey.com/catalog/en/partgroup/p-core-type/50202/tiny fishing

Thanks for shairng.