Infrared Transmission

ryanleung

Jul 18, 2005
58
Joined
Jul 18, 2005
Messages
58
hello everybody~~~

I would like to design the circuit.

 
Last edited by a moderator:

audioguru2

Apr 6, 2004
12,026
Joined
Apr 6, 2004
Messages
12,026
Hi Ryan,
Welcome to our forum. ;D
The transistors in the transmitter don't have bias current so their output will be zero until a certain input level is reached. The result with enough input level is extreme distortion.

The receiver applies a fairly high current through your headphones which probably burned them out!

 

ante1

Jan 24, 2004
4,138
Joined
Jan 24, 2004
Messages
4,138
Hi Audioguru that was post number 5000  :eek:  so good luck with the next 5000!  ;D

 

audioguru2

Apr 6, 2004
12,026
Joined
Apr 6, 2004
Messages
12,026
Hi Ante,
Thanks. I was near 5000 and I tried to cheat a little. I corrected spelling in some old posts hoping that each revision would be counted. Nope.

Why are there so many lousy designs on the web? ???
There are too many for us to fix. Many use old obsolete parts.
Maybe the circuits on the web should all be deleted or re-formatted then only good designs posted. ;D

 

ante1

Jan 24, 2004
4,138
Joined
Jan 24, 2004
Messages
4,138
Hi Audioguru,

Yes it’s true, quite a few projects use obsolete parts or hard to get parts but often they can be substituted with modern parts. I think most circuits work even though many can be greatly improved by an ace like you. ;D  The once which don’t work at all must be made by mistakes or typos. 8)

 
Top