Unknown pcb switch

[Bert63]

I need help identifying this dpst momentary switch. Aproximately 18mm square

 

[Martaine2005]

Is it latching? Non latching? Illuminated?
What’s it from?
Give us some clues in order to help you.

 

[Bert63]

Momentary, nonilluminated

 

[Martaine2005]

Yes, a difficult switch to find.
Even AI picture lookup couldn’t identify it.
Are there any Automec/CNC type forums that may be able to help?.

I think you have three possible options.
1. Fit a momentary switch under the original casing?. Keeps it looking original.

2. Look to buy a broken controller panel cheap and keep it for the spare parts.

3. Upgrade the panel (as Automec will suggest).

Going by the cost of these machines, I would slowly replace the switches with square momentary switches and dust covers.
I’m not sure what voltage/current requirements are for the switches, but you can easily measure that.
I’ll keep looking for you though. There must be some information somewhere!.
Automec might give you a head start. I bet their engineers throw them out when upgrading panels.

 

[bertus]

Hello,

@Minder , do you have any idea about the switches?

Bertus

 

[Minder]

Sorry not really familiar with those .

 

[Delta Prime]

Accurpress press brake upgrades

If you have a G24, CNC99, CNC1000 or CNC2000 with a mechanical structure that is still in good working condition you can upgrade your existing Automec backgauge control to a CNC 9×9, CNC 150, CNC 300, CNC 600 or PC 800. We will need to know the serial number of your backgauge so we can […]

www.automec.com

 

[bidrohini]

The closest match, but these are bigger though

704.908.3 eao Price | Stock | Datasheet - Unikeyic

704.908.3 eao Datasheet, Inventory, & Pricing, Unikeyic Provides Excellent Prices and Services.

www.unikeyic.com