Latest activity
-
1. Have you tried cleaning the lens?. 2. It’s a risk that might pay off. -
JJerry In Maine posted the thread Two audio outputs into one 8 ohm speaker in General Electronics Discussion.In my "Ham Shack" I have two transceivers. I'd like to combine the outputs into one 8 ohm speaker. Spec sheets say that one radio's...
-
SSergey.elektronika.pro reacted to Delta Prime's post in the thread Jamo SUB250 subwoofer circuit diagram with
Like.
-
Delta Prime reacted to Martaine2005's post in the thread Conservation CD and DVD optical medias with Like.
I wonder how long this will go on for? I think we're being played :p -
Also try cleaning the little disc that spins the DVD. This sometimes helps to restore grip so the disk does not slip. Use alcohol and a...
-
1. Have you tried cleaning the lens?. 2. It’s a risk that might pay off.
-
Delta Prime reacted to danadak's post in the thread Same voltage but is the current output different? with Like.
Compare the datasheets : https://www.jauch.com/downloadfile/5ef1edcfd15cf1c9921d36c851eb4c34f/cr2032.pdf...
-
For small number I/O Molex might be a good choice. But we do not know enough about bandwidth of communication I/O and sensor interface...
-
Things to check: - pickup disc, possibly clean it with a swap soaked in alcohol - lens, same remedy, be veeeery careful, the lens is...
-
Delta Prime reacted to Harald Kapp's post in the thread Recommended ways to program Uno board with Like.
There's no use in repeating what others have said before. Apart from that remark, it is not a matter of ease or cleanliness: an Arduino...
-
Delta Prime reacted to danadak's post in the thread Recommended ways to program Uno board with Like.
If you have to drive power in the 0-10V area consider using monolithic OpAmps ...
-
Delta Prime reacted to Martaine2005's post in the thread Recommended ways to program Uno board with Like.
You don’t generate its code, you write it. C or C++. But there are 10s of thousands already written on sites like Arduino or github...
-
27.145 MHz is channel 4 or YELLOW for RC cars, boats etc. It’s now old technology. But to answer your question, it’s definitely possible...
-
Ddanadak replied to the thread Recommended ways to program Uno board.If you have to drive power in the 0-10V area consider using monolithic OpAmps ...
-
Eep user replied to the thread Recommended ways to program Uno board.Yes I know some outboard stuff is needed for 0-10V, since I'd be driving 10 or 20 watts; it's the logic that I don't want to spend...
