Kevin Weddle Posted August 11, 2004 Report Share Posted August 11, 2004 I have to fix the kit I have. The regulator seems to give out under higher currents after a brief while. I replaced the positive variable voltage regulator with the lm317t. This was easy to configure because I had the diagram. The lm337t which is the negative variable voltage regulator does not have a diagram. Should I use the same configuration because National does not specify the diagram for this particular device? It only specifies the configuration for the lm337.By the way, I had to rig the kit to my custom which I don't normally like to do. It has to be done because I don't like the voltage dropping out and plus the traces are starting to screw up and I have to connect the components with wire. Quote Link to comment Share on other sites More sharing options...
MP Posted August 12, 2004 Report Share Posted August 12, 2004 Kevin,Here is the data sheet.MPLM337.pdf Quote Link to comment Share on other sites More sharing options...
hotwaterwizard Posted August 13, 2004 Report Share Posted August 13, 2004 LM337 Datasheet Click HereNational Semi Info page click here Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.