spiritallover Posted September 26, 2004 Report Share Posted September 26, 2004 hi thereu know how can i build a micro contoroller based infrared link with my PC and mobile? ???best regards Quote Link to comment Share on other sites More sharing options...
surajbarkale Posted September 28, 2004 Report Share Posted September 28, 2004 Usually the COM2 port of a computer can perform the IRDA function. (tht is your IR data link) on most laptops IRDA port is directly available but on a PC you would have to change your BIOS settings to make COM2 ready for IR link &b ofcource you would need a suitalbe connector. Quote Link to comment Share on other sites More sharing options...
KeepGood Posted December 9, 2004 Report Share Posted December 9, 2004 Have a look at http://www.lirc.org/receivers.html for building an IR receiver and http://www.lirc.org/transmitters.html for building an IR transmitter. Both the receiver and transmitter are erally simple devices which can easily be built into the same device.That will give you your physical device for RX and TX but you will still need to set up your computers bios for IR on com2.Normally you'll find the IR setting in the peripherals section of you bios.I've built the Lirc Receiver/transmitter and it works great. Have fun. Quote Link to comment Share on other sites More sharing options...
login
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.