vivek_pv Posted August 2, 2006 Report Share Posted August 2, 2006 Dears,Which transistor/s should be used (how?) for creating a "not-gate"?And what should be the arrangement in order to cut-off the circuit if there is a specific signal? (using not-gate)Vivek v Quote Link to comment Share on other sites More sharing options...
indulis Posted August 2, 2006 Report Share Posted August 2, 2006 Do you mean an "inverter"??? H in L out and L in H out?? Quote Link to comment Share on other sites More sharing options...
audioguru Posted August 2, 2006 Report Share Posted August 2, 2006 Who made-up the silly name "NOT Gate"? Why doesn't everybody call a digital inverter an inverter? Quote Link to comment Share on other sites More sharing options...
vivek_pv Posted August 2, 2006 Author Report Share Posted August 2, 2006 Yes. I want to make a transistor based digital inverter circuit.Please guide me.Vivek Quote Link to comment Share on other sites More sharing options...
indulis Posted August 2, 2006 Report Share Posted August 2, 2006 Think about the base/collector relationship in a NPN, common emitter configuration... Quote Link to comment Share on other sites More sharing options...
audioguru Posted August 2, 2006 Report Share Posted August 2, 2006 You don't need a book to tell you how to design a transistor digital inverter.Take a transistor and add a base resistor and a collector resistor. Quote Link to comment Share on other sites More sharing options...
audioguru Posted August 3, 2006 Report Share Posted August 3, 2006 I don't know why he wants to use an inverter instead of a gate, and I don't know why he wants to make his own inverter. Maybe because his teacher told him to do it. Quote Link to comment Share on other sites More sharing options...
vivek_pv Posted August 3, 2006 Author Report Share Posted August 3, 2006 Hi all,I want to construct a simple transistor based NC (Normally Closed) type of switch; which should be open when there is a signal.Please guide.Vivekanand. Quote Link to comment Share on other sites More sharing options...
indulis Posted August 3, 2006 Report Share Posted August 3, 2006 What do you want to switch? Quote Link to comment Share on other sites More sharing options...
vivek_pv Posted August 3, 2006 Author Report Share Posted August 3, 2006 The thing is:There is one circuit which is "normally closed" so that one LED is on.If one particular signal comes, I want, that the "normally closed" circuit should be open, till that signal lasts.This I can do it by a relay. But I wish to know what is the transistor equivalent for this type?Regards,Vivekanand Quote Link to comment Share on other sites More sharing options...
audioguru Posted August 3, 2006 Report Share Posted August 3, 2006 A transistor can easily turn an LED on and off, and be controlled by certain types of signals, but you don't say the details of your signal.We need to know the voltages and currents of the signal when it is active and when it is inactive. Also we need to know if it is DC or AC.If your signal is too complicated to describe in words then attach its schematic. Quote Link to comment Share on other sites More sharing options...
vivek_pv Posted August 4, 2006 Author Report Share Posted August 4, 2006 Hi,I am attaching the schematic design of this. It is not so complicated design. Rather very simple.Details : Source = 3V DC, Always the path AB is closed (NC). If I press the switch, then the closed path of AB should be cut off as long as the switch is closed.I hope it is clear.regards,v Quote Link to comment Share on other sites More sharing options...
vivek_pv Posted August 4, 2006 Author Report Share Posted August 4, 2006 Hi,Ofcourse, there is nothing in the dotted square. It is to show the point of question only.I know about push to break switches and relays to do this. But basically I need such transistor topology to adapt in my various projects.I will be grateful if one tells me how to use transistors to do this.regards,Vivekanand Quote Link to comment Share on other sites More sharing options...
audioguru Posted August 4, 2006 Report Share Posted August 4, 2006 This simple transistor circuit will turn on the LED because the 3.3k resistor applies base current to the transistor when the switch is open. Then the transistor and LED turn off when the switch is closed.The battery will have the 0.9mA of the 3.3k resistor as a current when the switch is closed. Quote Link to comment Share on other sites More sharing options...
vivek_pv Posted August 4, 2006 Author Report Share Posted August 4, 2006 Is this the only way to create?If not, then is there any other way so that battery power is saved? (When this switched is closed, the 3.3k will consume some little current)Is this model called a "digital inverter" Quote Link to comment Share on other sites More sharing options...
audioguru Posted August 4, 2006 Report Share Posted August 4, 2006 Is this the only way to create?No. Transistors can be used as switches many other ways.is there any other way so that battery power is saved? (When this switched is closed, the 3.3k will consume some little current)Yes. You can add a 2nd transistor to make your own darlington transistor or buy a darlington transistor. Then the 100k resistor consumes very little current. See my modified schematicIs this model called a "digital inverter"No. It is a transistor inverting switch. A digital inverter inverts a digital voltage level or pulse. Quote Link to comment Share on other sites More sharing options...
MP Posted August 11, 2006 Report Share Posted August 11, 2006 Dears,Which transistor/s should be used (how?) for creating a "not-gate"?And what should be the arrangement in order to cut-off the circuit if there is a specific signal? (using not-gate)Vivek vPerhaps this drawing makes it more clear?MP Quote Link to comment Share on other sites More sharing options...
vivek_pv Posted August 12, 2006 Author Report Share Posted August 12, 2006 Thanks a lot for all....... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.