johnc12 Posted January 19, 2007 Report Share Posted January 19, 2007 helow guys i already posted this problem on choosing the best amplifier for my two sony satellite speaker model ss-rs158v rated impedance of 6 ohms.... my problem is how to connect the two with my stereo amplifier... audioguru told me to use a crossover circuit to avoid bass in entering my speaker..... it would be a great help if someone could tell me how to connect it together...... thanks in advance... ;D Quote Link to comment Share on other sites More sharing options...
audioguru Posted January 19, 2007 Report Share Posted January 19, 2007 Hi John,I wish you continued on the other thread instead of making this new thread. I reviewed the other thread and it talked about our "22W" amplifier project. With a 12V supply each 6 ohm speaker will get 6.5W but they are small so bass might break them.You need a crossover circuit and a woofer with its own amplifier. A woofer size of 6" to 8" and an amplifier for it of 20w to 40W will sound good.The power is low so a very simple crossover circuit can remove the bass from the little satellite speakers and remove the high audio frequencies from the woofer speaker. Separate amplifiers are used so the filters can be part of the amplifiers.Here is a pretty good crossover circuit project:http://www.sound.westhost.com/project81.htm Quote Link to comment Share on other sites More sharing options...
MP Posted January 20, 2007 Report Share Posted January 20, 2007 I didn't see the original conversation, but don't all of the SONY Satellite speakers already have frequency compensation and crossover networks built into them? Why would additional filtering be needed?MP Quote Link to comment Share on other sites More sharing options...
audioguru Posted January 20, 2007 Report Share Posted January 20, 2007 I couldn't find spec's for the Sony satellite speaker system in Google, but I suspect that it uses a separate amplifier for its sub-woofer with a lowpass filter, and a stereo amplifier for the satellite speakers with a highpass filter that uses small capacitor values. Then the satellite speakers don't have large value capacitors as an internal filter.John needs to duplicate the original Sony amplifiers, filters and woofer. Quote Link to comment Share on other sites More sharing options...
MP Posted January 20, 2007 Report Share Posted January 20, 2007 Yeah, but sony has filtering inside the speakers. John might not even have a problem. Without specifications, it is a coin toss. MP Quote Link to comment Share on other sites More sharing options...
johnc12 Posted January 22, 2007 Author Report Share Posted January 22, 2007 thanks audioguru and MP.... i'll try to see if my speaker has a built in filter in it.... but i think it has... just to make sure.... :) Quote Link to comment Share on other sites More sharing options...
johnc12 Posted February 15, 2007 Author Report Share Posted February 15, 2007 hi audio guru,do I have to connect my two satellite speakers to the tweeter output??? what will happen if i do that?johnc Quote Link to comment Share on other sites More sharing options...
audioguru Posted February 15, 2007 Report Share Posted February 15, 2007 hi audio guru,do I have to connect my two satellite speakers to the tweeter output??? what will happen if i do that?johncEach satellite speaker needs a highpass filter part of a crossover network connected to a power amplifier. Maybe the satellite speakers have a highpass filter built-in.Then the satellite speakers will play the middle and high frequencies.A woofer or two need their own lowpass filter part of a crossover network and a power amplifier or two. Then they will play the bass frequencies. Quote Link to comment Share on other sites More sharing options...
johnc12 Posted February 15, 2007 Author Report Share Posted February 15, 2007 hmm. can play both mid and hi? so when i make a 3 way crossover my other satellite speaker can be connected to the mid.... :-\ Quote Link to comment Share on other sites More sharing options...
audioguru Posted February 15, 2007 Report Share Posted February 15, 2007 Don't you want stereo? Then use a satellite speaker for each midrange. Then a real tweeter will be for the high frequencies on each channel and a woofer can be for the bass on each channel. Quote Link to comment Share on other sites More sharing options...
johnc12 Posted February 15, 2007 Author Report Share Posted February 15, 2007 i see now. by reading some materials and some of you're ideas it is now clearer to me. what you've given is a active crossover which uses op amps to drive the speakers and I also seen a project in this site a two way crossover but it is a passive one or the a simple one because it only uses caps, resistors and inductors.. correct me if i'm wrong... :)does the project here (two way crossover) can be use in stereo amp? Quote Link to comment Share on other sites More sharing options...
audioguru Posted February 15, 2007 Report Share Posted February 15, 2007 what you've given is a active crossover which uses op amps to drive the speakersNo, an active filter using opamps does not have power. It drives a power amplifier.I also seen a project in this site a two way crossover but it is a passive one or the a simple one because it only uses caps, resistors and inductors.The passive crossover project here has an error with the phase of the wooofer and tweeter that results in a deep notch at the crossover frequency. I switched the phase of the tweeter to correct it. It is designed for a real 8 ohm tweeter but might work with your satellite speaker and a woofer. does the project here (two way crossover) can be use in stereo amp?The crossover circuit is for a single two-way speaker. Two circuits driven by a stereo amplifier are needed for stereo. Quote Link to comment Share on other sites More sharing options...
johnc12 Posted February 17, 2007 Author Report Share Posted February 17, 2007 Aw... hehe... thanks for correcting me. I'll try to review my audio electronics basic :(I think the project is quite expensive and I think troublesome in my part. I've been studying Communication Electronics but when I shifted computer my focus turned into it.But I think I'll give it a try and try to post with my finish pic... :)I asked about this project because I want my extra sony speaker to be connected into my computer..... to really enjoy the sounds without buying new stereo speakers...thanks a lot ;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.