fedrer Posted July 13, 2009 Report Share Posted July 13, 2009 I have just completed all the Ardunio electronic and I cannot make my stepper motor drive. All 3 LED's come on and 2 change colour but as soon as I plug in the stepper either the leds go out or the power supply trips . When I put a multi meter accross the outputs I get about 10v over a and b and the same over c and d.I am guessing that I have wired up the stepper motor incorrectly unless anyone else has any other ideas. It is the motor from bits from bytes.I have wired together blue and red/white and made blue/white A and red BThen wired together black/white and green then made green/white C and black D.Thanks _____________________Life Insurance Quotesresume writer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.