jheff Posted October 11, 2011 Report Share Posted October 11, 2011 We have a small project about piezo electric. We used ceramic transducers and our problem is that the current is too small. Our LED's are dull and not a bright as the normal brightness of LED's. Please lend us some advice on how to increase our current. Does Darlington Circuit really helps improve our current?When we apply force on our transducers we gain the ff. specs:-Voltage ranges from 2V - 40V AC-Current ranges from 1mA-6mA ACWe really need some professional advice Thanks! ::) Quote Link to comment Share on other sites More sharing options...
Hero999 Posted October 11, 2011 Report Share Posted October 11, 2011 Plsea post a schematic of what you already have. Quote Link to comment Share on other sites More sharing options...
jheff Posted October 11, 2011 Author Report Share Posted October 11, 2011 @ Hero999all of our ceramic transducers are in parallel.. We don't really have a schematic.. We just need some advice on how can we increase our current.. ??? Quote Link to comment Share on other sites More sharing options...
Hero999 Posted October 11, 2011 Report Share Posted October 11, 2011 Are you just trying to power the LEDs from the transducers? If so you need to add more transducers or increase the force or speed of the mechanical action. Adding a transformer will increase the current but the voltage will be lower so may not be high to light the LEDs.You need more power. The only other way would be to use an amplifier which requires another power source be it a battery, solar power or the mains. You can't create power from nothing. Quote Link to comment Share on other sites More sharing options...
jheff Posted October 11, 2011 Author Report Share Posted October 11, 2011 Yes sir, we are trying to power up the LED. But the LED is too dim when we apply mechanical forces. We tried 4 transducers in parallel but the LED is still too dim. I searched about Darlington Circuit, is it advisable to use this circuit to increase our current with battery? Quote Link to comment Share on other sites More sharing options...
audioguru Posted October 11, 2011 Report Share Posted October 11, 2011 We talked on one of these forums about harnassing energy from a piezo transducer in a shoe.It drives an IC made for the very low voltage and very low current. Then the IC charges a capacitor or battery.When enough energy is stored then another IC can blink an LED. Quote Link to comment Share on other sites More sharing options...
jheff Posted October 11, 2011 Author Report Share Posted October 11, 2011 can you give me the link for the forum please?thanks!lol ;D Quote Link to comment Share on other sites More sharing options...
audioguru Posted October 11, 2011 Report Share Posted October 11, 2011 can you give me the link for the forum please?It was one or two years ago and i don't remember which website..Look at Energy Harvesting in Google. There are millions of links. Quote Link to comment Share on other sites More sharing options...
Hero999 Posted October 12, 2011 Report Share Posted October 12, 2011 Yes sir, we are trying to power up the LED. But the LED is too dim when we apply mechanical forces. We tried 4 transducers in parallel but the LED is still too dim. I searched about Darlington Circuit, is it advisable to use this circuit to increase our current with battery?The circuit in question only lights the LED briefly when enough energy has been gatherd. It doesn't continuously light the LED brightly. You can't create energy from nothing, for example, there isn't a circuit which would allow a single AA cell to provide enough power to boil a kettle and the same principle applies here. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.