Search results

Search Forums New Posts
  1. Maglatron

    help with IR2110 chips

    Anyone have an idea?
  2. Maglatron

    help with IR2110 chips

    I've bought more coils and they arrive tomorrow and I'm going to mount them so that the coils will be more balanced so that the small ones will be swapped out and try and get a better result! but still open to ideas of how to get the circuit working as is!
  3. Maglatron

    help with IR2110 chips

    I think it's nearly right because the spikes are around the 156volts like you said Mr Bertus just think it needs a little tweaking! maybe a capacitor or something?
  4. Maglatron

    help with IR2110 chips

    Hello Mr Bertus can you perhaps tell me how to get the IR2110's working with my setup so that the wave form is that of the desired?
  5. Maglatron

    help with IR2110 chips

    any help on this?
  6. Maglatron

    help with IR2110 chips

    I think that it is happening like I imagined and the built up charge in the capacitor just collapses, is that right?
  7. Maglatron

    help with IR2110 chips

    look at this see what you recon. As you see it does not work can anybody render it to full working order? so the ac coils power the circuit I've provided both the schematics working one is "done_ski" and the one I want working is the "modelling machine with..."
  8. Maglatron

    help with IR2110 chips

    did you see this post I posted it like seconds before your comment?
  9. Maglatron

    help with IR2110 chips

    look at this see what you recon. As you see it does not work can anybody render it to full working order?
  10. Maglatron

    help with IR2110 chips

    so this is what I have the capacitor does not charge like in real life, in real life it charges to 55-60v
  11. Maglatron

    help with IR2110 chips

    so I have some results them arduinos are dodgy a NANO and 4 of my knock off UNO R3 don't work uploaded to my old MEGA 2560 fine will create a Spice model now was running at 600 rpm so that's 40Hz back in 10!
  12. Maglatron

    help with IR2110 chips

    thanks got it now, still learning
  13. Maglatron

    help with IR2110 chips

    so did not make readings because one part failed and have to wait for the super glue to go off before I run it again not risking running it till completly dry I measured the resistances though front top 13ohm front side 10ohm back bottom 59ohm and back side 54ohm and one voltage reading before...
  14. Maglatron

    help with IR2110 chips

    awsome guy!! can you provide an example between to voltage sources please? I'm going for a session in less than an hour so if you can shed some light on how to get the arduino's working that would be great too! thank you so I think this is right so far
  15. Maglatron

    help with IR2110 chips

    How to I model the 1/3rd out of phase in ltspice please! I'm going to take measurments of the ac off of the coils today and try to simulate it's behaviour in the LTSpice program
  16. Maglatron

    help with IR2110 chips

    you can see the capacitor bank in lots of the photo's!
  17. Maglatron

    help with IR2110 chips

    so those R3 UNO's that I mentioned do not come up with a port number normally port 3 or port4 and when trying to upload the squarewave code to the nano it comes back as avrdude: ser_open(): can't set com-state for "\\.\COM3" An error occurred while uploading the sketch does anyone know whats up...
  18. Maglatron

    help with IR2110 chips

    there is one coil that is just an untouched coil factory wound, It's at the bottom on the back I used ferite welding rods for the core the rest of the three coils are wound around bolts and the Neo's are doubled up so 8mm of magnet! on both sides of the wheel
  19. Maglatron

    help with IR2110 chips

    hopefully take more pics tomorrow and show some digits on the readings!
  20. Maglatron

    Sallen Key Low Pass Filter, bandpass filter

    here's the display progress is slow but still progressing!
Top