Search results

Search Forums New Posts
  1. roughshawd

    off topic problem with fancy smart kegger and gas, fluid cooling system.

    Thanks, for KellysEye, you got to know that I put the stuff in the stub, but that's not where the suck was, and for Bluejets, well with two connectors, you can see the high pressure and the low pressure at the same time.... (those two guages on the AC gas thing... that's just a manifold. Not a...
  2. roughshawd

    Confusion, Deliberate hacking, Guesses, Tests

    ...isn't that called reverse engineering???!!! My service manual tells you all about how to do things and then says not a good idea to try this if you're not a repair tech. So defaults here we come, and what about that real quiet guy who finally got it working??!!!
  3. roughshawd

    Old module does not work

    Great vid, took a while to reach the repair but the car is nice...! re-itterate. Regular cheap electrical solder, usually works fine, but things like motor relays usually require a stronger and higher silver content solder that requires a bit hotter than normal iron. This stuff was built by a...
  4. roughshawd

    Capacitor?

    Here we are again! With our little thermistor in one hand and power company in the other! Assume your thermostat says to your braniac powerful completely ficticious by magically working 'heat pump' "Its getting cold, but the power if off and I can't get you to start..." because its running off...
  5. roughshawd

    Samsung SmartKegger

    The operation with the 'forced function' on this device is not just an on | off, but is nothing less than a complete bypass of the entire systems onboard for testing purposes only. With everything working, the bypass set to normal function, the device should function properly.
  6. roughshawd

    Samsung SmartKegger

    roughshawd posted a new item update Sept. 13 2022 on the Item Samsung SmartKegger
  7. Samsung SmartKegger

    Samsung SmartKegger - Sept. 13 2022

    I have the fridge on forced operation for 24hrs. I set all the functions to the defaults in the service manual The freezer is cooling down, the fridge is cooling down, the CV room is cooling down. i.e. the refridgerant valve system is in 'swing' and functioning properly. The sensor in the...
  8. roughshawd

    Samsung SmartKegger

    This thread is for the general discussion of the Item Samsung SmartKegger. Please add to the discussion here.
  9. Samsung SmartKegger

    Samsung SmartKegger

    Retrieved 3000.00 fridge from angry consumer for cost of gas approx $1.00 Found compressor was empty of freon, so assumed a leaky compressor. Shop time 3hrs [email protected]/hr approx21.00 vac tested the lines overnight, held 10# over 10hrs. assuming micron drain somewhere. apprx $21.00 Put 95g...
  10. roughshawd

    Samsung 2017 Smartfridge component missing

    no 4... including the mini inductive PSU before the inverter... and there arare over 100v running from the cap bodies on the inverter to the back wall of the fridge....
  11. roughshawd

    Samsung inverter board LED Fail

    Thanks I knew I was missing something (or alot of something!)
  12. roughshawd

    Power supply for wireless speaker

    Do you still have the plug? The one that fits the hole I am seeing?
  13. roughshawd

    Confusion, Deliberate hacking, Guesses, Tests

    You know what is coming! The smart fridge is a nightmare of electronical devices! Let me start with the fool proof control panel(buttons are not refered to as the control panel in fridge's case but in this case I will start with the rexx system because of the title) This is a (smoke and...
  14. roughshawd

    Samsung inverter board LED Fail

    Can I buck convert a 100v?
  15. roughshawd

    Samsung inverter board LED Fail

    The board, um forgot what I was gonna ask everytime I log on.... let me think... duh hey I REMEMBER !!!!!!! I REMEMBER !!!!!! I REMEMBER !!! The inverter board is 220v and says ISB-LC3_3050_V2 VDE 220-240~50Hz T85 220V-60Hz 200-240V |100-127v 250v-T5AL | 250V T6.3AL Its a 220v fridge in a...
  16. roughshawd

    Stainless Electric Motor shaft holder clip.

    forum master, please delete this idiotic babbling. Just cause I can type... well now you get it!
  17. roughshawd

    Samsung inverter board LED Fail

    So if it is an intermittent problem, then the drill down says, loose connection somewhere... I checked the back side of the board for solder fails.... looks good... there is a 5 pinout says Test 1 Test 2 NRST (nothing) Grnd, what is NRST(reset?) and what is the testing that needs to be performed?
  18. roughshawd

    Samsung inverter board LED Fail

    This is the one that shocked me. Index finger on one cap, middle finger on the other, apply slight pressure... WOW.... WHAT A RUSH!!!
  19. roughshawd

    Samsung inverter board LED Fail

    inverter was flashing 3 times, said something about wrong polarity somewhere, then it flashed 4 times said something about the soldering terminals on the bottom of the inverter board, and then I thought maybe I would touch the two caps on the board...!!!!! bad idea!
  20. roughshawd

    Samsung inverter board LED Fail

    Freezer isn't working now, but, and I say but... The inverterboard has power running across the top of the caps.... I mean is it supposed to shock me when I touch the top of the caps???
Top