Latest activity
-
hevans1944 replied to the thread Newbie Advice Needed Please.Hmmm. Yet another drive-by poster who is only looking for a "quick answer" and is unwilling to enter into a discussion. If I were... -
hevans1944 replied to the thread RF-ID advice needed.The key parameter that you need is the position of the train: "...when a train enters & leaves an area", An RF-ID will NOT accomplish...
-
hevans1944 replied to the thread issue with homemade DC motor + hall effect sensor.The A3144 has an open-collector NPN transistor output. This needs to be directly collected to the MOSFET gate input and pulled up with a...
-
crutschow replied to the thread How is coating wear on ESD tweezers typically assessed in production environments?.What is the purpose of this "anti-static" coating on the tweezers since they are made of conductive metal? Does the lack of it affect... -
Martaine2005 reacted to bertus's post in the thread Suitable replacement for a large Siemens capacitor in an old IBM XT power supply with
Like.
Hello, The datasheet i posted shows wich pin is positive and wich pins are negative. Even an axial capacitor would be possible to use... -
davenn replied to the thread Suitable replacement for a large Siemens capacitor in an old IBM XT power supply.well, if we cant seen the pins (even whilst it's still on the board) - then it's very difficult to help you -
Aalfredthegrape replied to the thread Suitable replacement for a large Siemens capacitor in an old IBM XT power supply.@bertus: Unfortunately the cap you mention is an axial component, and I require a radial one. It looks as though I'm going to have to...
-
EdwardShone posted the thread How is coating wear on ESD tweezers typically assessed in production environments? in General Electronics Discussion.I’ve been working with ESD protection practices in electronics manufacturing environments, particularly around static control programs...
-
CCHINH NGUYEN replied to the thread Dual-Output (Step-Up/Step-Down) DC-DC Converter via Shared Inductor Loop.Dear community, To prevent any confusion and to provide a comprehensive view of this topology, I have updated the main schematic in...
-
-
KKieu Vu posted the thread Hidden Gems: Lesser-known but surprisingly useful components — share yours! in General Electronics Discussion.Hi everyone! I'm fairly new to electronics and have been trying to keep up with what's out there beyond the usual Arduino shields and...
-
CCHINH NGUYEN posted the thread Dual-Output (Step-Up/Step-Down) DC-DC Converter via Shared Inductor Loop in General Electronics Discussion.Logic Architecture: Synchronous Rectification: and operate in perfect synchronicity, sharing the same gate drive signal ()...
-
-
Aalfredthegrape replied to the thread Suitable replacement for a large Siemens capacitor in an old IBM XT power supply.@davenn: The cap is still on the board as I don't want to start removing components before I have replacements to hand, so pictures of...
-
-
hevans1944 reacted to Harald Kapp's post in the thread JK Flip-Flop Toggles Twice from One Button Press with
Thanks.
very much likely insufficient debouncing possibly, but not necessarily definitely Here's a comprehensive text on debouncing. -
hevans1944 replied to the thread JK Flip-Flop Toggles Twice from One Button Press.I just now found one of my missing "round tuits" and read the paper linked to in @Harald Kapp's first response. Very nice analysis of...
-
Before soldering, You can try this hack. Insert the Cable: Carefully slide the ribbon cable into the FPC connector. Shim the Cable: Cut...
