Latest activity
-
Bbidrohini replied to the thread Recommended ways to program Uno board.Tools such as Visuino or Flowcode can generate Arduino code from graphical logic, but the Uno cannot directly accept or output 0-10 V...
-
Martaine2005 reacted to danadak's post in the thread Recommended ways to program Uno board with
Like.
The uno board cant generate 0-10V for starters. You would need to amp up a pwm or DAC output for that purpose. Its 6 channels limited to... -
Ddanadak replied to the thread Recommended ways to program Uno board.The uno board cant generate 0-10V for starters. You would need to amp up a pwm or DAC output for that purpose. Its 6 channels limited to...
-
Ddarkbeer replied to the thread repair Tribest Sedona SD-P9000 dehydrator -- low DC voltage from power board: maybe rectifiers or caps?.It died again, slow fade I will be replacing all the diodes tomorrow will report back if that fixes it.
-
Ddarkbeer replied to the thread repair Tribest Sedona SD-P9000 dehydrator -- low DC voltage from power board: maybe rectifiers or caps?.For anyone seeing this 12 years later. Mine decided to power up for 10 seconds and shut off. Checked all the diodes which were fine I...
-
Martaine2005 replied to the thread Recommended ways to program Uno board.You don’t generate its code, you write it. C or C++. But there are 10s of thousands already written on sites like Arduino or github...
-
EI know the basics of the Arduino Uno board, but need a way to generate it's code. I would provide input info such as: One 0-10V...
-
Martaine2005 replied to the thread Will an over‑discharged "dead" battery be woken up by NFC wireless charging?.I think the battery chemistry would be damaged if depleted below a certain threshold. Reviving a fully depleted/discharged cell may work...
-
Martaine2005 replied to the thread DVD Optical Pickup Assembly.1. Have you tried cleaning the lens?. 2. It’s a risk that might pay off.
-
YCross-posting on several forums; I hope that's ok. I have an LG model RC288 combination VCR and DVD RW. The VCR works fine, but the DVD...
-
UUKMOJO posted the thread Help with Mura meter 80M Wiring in Datasheets, Manuals and Component Identification.I'd be grateful of anyone can help me with the wiring on this lovely vintage meter. It's just been cleaned and rebuilt as old batteries...
-
-
Luke11 posted the thread Will an over‑discharged "dead" battery be woken up by NFC wireless charging? in Power Electronics.When lithium‑ion batteries are deeply discharged, even down to 0 V, many charging solutions have an under‑voltage startup threshold. A... -
Luke11 reacted to olivia_49's post in the thread Is AI making any impact on embedded software development? with Like.
You’re right, most AI tools ignore embedded realities. Some engineers still use AI effectively for driver scaffolding, RTOS design, and...
-
If this is the right connector and only the locking bar is missing, you may try to get a replacement connector and transplant the... -
Martaine2005 reacted to Delta Prime's post in the thread Is AI making any impact on embedded software development? with Like.
yes :)I know 25.810^2 specific useful examples & the associated platform tools; trained neural networks. by the way, 25.810 squared...
