Search results

Search Forums New Posts
  1. Maglatron

    help with IR2110 chips

    could it be resonating?
  2. Maglatron

    help with IR2110 chips

    wait using two coils must increase power because there are two of them!! rather than one
  3. Maglatron

    help with IR2110 chips

    so why does the average power dissipation = 3.4watt? and not 18watt
  4. Maglatron

    help with IR2110 chips

    so the simulation does not reflect whats going on, the voltage reaches 28volt on the meter for the 40Hz I did 600 / 60 = 10 and the * by the number of north poles (on one side), 4, = 40Hz, can you figure out the anomoly ?
  5. Maglatron

    help with IR2110 chips

    this is not a good reflection of what is happening in real life because in real life the DCvolts come to 28volt
  6. Maglatron

    help with IR2110 chips

    600 rpm real life so no power gain? the 28 volts is with the 7 ohm coil output through the rectifier that is still in the configuration I had it before in the image below
  7. Maglatron

    help with IR2110 chips

    is it possible to add the outputs of the coils? in series and does a say north have to be passing the coils at the same time? and then add and compound the coils from the front and back the two on the front would be in series Vtotal=28V+28V=56V
  8. Maglatron

    help with IR2110 chips

    I don't get what you mean by this?
  9. Maglatron

    help with IR2110 chips

    I want to add them so they're 56v
  10. Maglatron

    help with IR2110 chips

    so what about my 7 ohm coil that produces 14 volt ac and 28v dc if I make 3 more identical for some reason I like these numbers they sound "about right"
  11. Maglatron

    help with IR2110 chips

    so my new coil produces 14volt from the raw ac and out of the rectifier 28volt BUT it's only 7 ohm tell me your thoughts on this!! thanks can I compound the voltages if I made three more coils exactly the same and on the next wheel put 10 magnets either side and all in phase (no offset)
  12. Maglatron

    help with IR2110 chips

    what is cv -= 0.2 mean
  13. Maglatron

    help with IR2110 chips

    where is it says "should be 18watt load" I checked and it's only 3.4watts average
  14. Maglatron

    help with IR2110 chips

    Is this taking into account the 50 ohm of the resistance of the coils? nevermind says 27! what is the 50m part and what is (v) for on the what is (a) and (f) nad what is (pp) and (del) going to measure the voltage of the new 7 ohm coil and see what it puts out!
  15. Maglatron

    help with IR2110 chips

    why is the 100 ohm resistance run at a higher voltage than the 50 ohm? thanks
  16. Maglatron

    help with IR2110 chips

    could I get the spice file please? thanks
  17. Maglatron

    help with IR2110 chips

    if it gives out good voltage then I will make 3 more coils the same
  18. Maglatron

    help with IR2110 chips

    so I just wound quite a big coil 0.7 mm 500 gram 142 meters didnt count the turns going to fit it asap and see what voltage it produces got to fit it and see how many volts it produces it's a fairly big coil to be fair wound round a bolt it's thicker than the 54ohm coils but I didnt think that...
  19. Maglatron

    help with IR2110 chips

    at least you have an idea of what I'm trying to achieve with the wave form and that!
  20. Maglatron

    help with IR2110 chips

    nope that wont fit and doesn't line up the magnets correctly I think that 16 is the next that works but there's no space
Top