Search results

Search Forums New Posts
  1. Martaine2005

    Help To Change The Led Colors On A Pinoeer DJM 400 Mixer

    Nothing wrong with being prepared!! Check out some videos of the innoFADER being installed. It will show you how to remove the top. Then you have to remove the board from the underside of the top to access the LEDs. Martin
  2. Martaine2005

    need a fuse resistor

    And I bet Mouser is the only place you didn't check:) Martin
  3. Martaine2005

    Help To Change The Led Colors On A Pinoeer DJM 400 Mixer

    Wow, three replies at the same time!!!!!! "Blow" must be your lucky name:D Martin
  4. Martaine2005

    Help To Change The Led Colors On A Pinoeer DJM 400 Mixer

    Hi Blow, You would need to open up the unit and make sure all LEDs are reasonably easy to get to. I would think that red LEDs would be a straight swap. But checking the voltages to red and orange LEDs first would be a good idea. The orange on the volume level will be a different problem...
  5. Martaine2005

    Help on finding a DVD player that does surround sound

    Hi Damien, It looks like your surround system is powered, so it already has an amp. Any DVD player will work with it. What inputs does the woofer have on the back? What is the model number? The picture is blurred.. Martin
  6. Martaine2005

    Pre Wired LEDs

    When you have researched and collected enough info, you can use this wizard http://led.linear1.org/led.wiz
  7. Martaine2005

    Pre Wired LEDs

    https://www.led-tech.de/en/0.5W-Power-LEDs_DB-86.pdf This site has some info on the 0.5w.
  8. Martaine2005

    Pre Wired LEDs

    Hehehe, How do you expect to use any kind of psu without knowing anything about them? I suggest you buy them from somewhere that gives all the specs!
  9. Martaine2005

    Pre Wired LEDs

    What value resistor?
  10. Martaine2005

    AVR Development Software Problem

    AVR Studio 7 Supported Operating Systems Windows 7, Service Pack 1 Windows 8/8.1 Windows 10 Windows Server 2008 R2 Service Pack 1 or higher Windows Server 2012 and Windows Server 2012 R2 32-Bit (x86) 64-Bit (x64) Computer that has a 1.6 GHz or faster processor RAM...
  11. Martaine2005

    Looking for DC wire to wire power connectors, overwhelmed | 350v+ 2A+

    Probably a good idea to read this resource too.. https://www.electronicspoint.com/resources/got-a-question-about-driving-leds.5/ Martin
  12. Martaine2005

    Pre Wired LEDs

    Hi Edward, What is the forward voltage of the LEDs? What is the forward current of the LEDs? Are they all the same colour? Have a good read of this resource HERE Martin
  13. Martaine2005

    Joke: ElectronicsPoint is SPYWARE

    http://wallpapercave.com/beaker-muppets-wallpaper Ian, I am sure you have seen this site before? Half way down is that image. Just right click, view image for full size.. Martin
  14. Martaine2005

    Joke: ElectronicsPoint is SPYWARE

    Oops, I did mean to say that, but forgot.. Thanks for editing it. Yes I have, Shall I post it here? Martin
  15. Martaine2005

    Joke: ElectronicsPoint is SPYWARE

    Be warned fellow members. Make sure your spyware definitions are up to date!! After using EP for several months, I decided to have a little clean up... Look what I found...
  16. Martaine2005

    Help with decreasing current

    Hi Tonny, The DVD player will only draw the current that it requires. There is no need to limit the current. The 1000mA adaptor supplied for it is already more current than it requires. It has a headroom on it to stop it working at it's maximum, getting hot and shortening the adaptors life...
  17. Martaine2005

    TVS Diode Manufacturer Identification

    Looks like it could be a copy..Or just badly labeled. Martin
  18. Martaine2005

    [HELP] Trying to build very specific portable battery!

    An example here
  19. Martaine2005

    New guy from N.C. usa

    Yeah, me too:) Welcome to the nut house Brandon!! We have spoken before in your post. As I said in that, don't give up! This forum will help you with all of your learning issues too. The people here are very knowledgeable and mostly patient..Some exceptions of course:oops: I personnaly have...
  20. Martaine2005

    Help with rotary switch adaptor

    I didn't feel it right to post a pic:p But I understand Uncle Chris... Marty
Top