Quectel SE200ZC-AP Smart Module Brings 3 TOPS Edge AI and 4K Vision to IoT
Built around the Rockchip RV1126B/RV1126BJ platform, this 40 x 40 mm Linux module integrates a 12MP HDR ISP, 8MP AI-ISP, and multi-camera support for smart security and robotics
Quectel has introduced the SE200ZC-AP, a compact smart module based on the Rockchip RV1126B/RV1126BJ SoC, featuring a quad-core Arm Cortex-A53 CPU, a 12MP HDR ISP, an 8MP AI-ISP, and a 3 TOPS NPU. The module is designed for AI cameras, smart security, industrial vision, robotics, and other edge AI applications.
The 40 x 40 mm module supports up to five camera inputs, 4K video encoding and decoding, and interfaces including Gigabit Ethernet, USB 3.0, CAN FD, and MIPI CSI. It also supports external Wi-Fi, Bluetooth, LTE, and GNSS modules for connectivity and runs Linux/Debian software.
Quectel SE200ZC-AP – A smart module built around the Rockchip RV1126B/RV1126BJ SoC
Quectel SE200ZC-AP specifications:
- SoC: Rockchip RV1126B or RV1126BJ
- CPU: Quad-core Arm Cortex-A53 up to 1.6 GHz (depending on variant), with NEON and FPU
- GPU: 2D Graphics Engine
- ISP: 12MP HDR ISP and 8MP AI-ISP
- AI Accelerator: Up to 3 TOPS NPU supporting INT4, INT8, INT16, and FP16 operations
- VPU:
- Video Decoder: H.265/H.264 up to 4K @ 30 fps
- Video Encoder: H.265/H.264 up to 4K @ 45 fps
- Multi-stream video encoding support
- System Memory: 1GB, 2GB, or 4GB LPDDR4x configurations, as previously reported
- Storage: 64GB eMMC flash (previously reported configuration), support for 2x SDIO
- LCC + LGA interfaces:
- Camera:
- 2x MIPI CSI interfaces, supporting up to four camera inputs through lane splitting
- 1x DVP camera interface
- Up to five cameras in total
- Display: MIPI DSI/LCDC interfaces
- Audio: 3x SAI, 1x PDM, 2x DSM
- Networking:
- 1x Gigabit Ethernet MAC (GMAC)
- External Quectel LTE Cat 4/Cat 1, Wi-Fi 6, Bluetooth, and GNSS modules supported
- USB: 1x USB 3.0, 1x USB 2.0
- Serial: Up to 8x UART, 6x I2C, 2x SPI, 2x CAN FD
- Other I/O: 22x ADC channels and additional PWM and GPIO interfaces
- Camera:
- Power Supply: 4.5V to 5.5V (5V typical, previously reported)
- Dimensions: 40.0 x 40.0 x 2.9 mm
- Temperature Range:
- Commercial: -25°C to +75°C
- Industrial: -35°C to +80°C
On the software side, Quectel says the module will support Linux 6.1 and Debian, although the product page marks the software as under development. The built-in NPU handles AI workloads locally, while the ISP and video encoder allow the module to process and record camera streams without relying on an external processor. The module lacks built-in wireless connectivity, but you can add Wi-Fi, Bluetooth, cellular, and GNSS with external Quectel modules.
Previously, we have written about several Rockchip RV1126-based vision modules and Quectel smart modules, including the Graperain RV1126B SoM, the Forlinx FET1126Bx-S, and the Quectel SH602FA and SE505FE modules, among others. Feel free to check those out if you are looking for alternative edge-AI vision or cellular-enabled smart modules.
Quectel has not published official pricing for the SE200ZC-AP. Its product page includes an EVB Kit section, but detailed evaluation-board specifications are not publicly listed. The company’s September announcement said customer samples and evaluation units would become available soon, without giving a specific date. More information is available on the product page and in the press release.
Images used courtesy of Quectel
