Toshiba TCKE6 Industrial eFuse ICs Features Auto-Retry and Latch Modes
https://www.electronics-lab.com/toshiba-tcke6-series-industrial-efuse-ics-features-auto-retry-and-latch-modes/
Toshiba’s TCKE6 40V eFuses ICs replace physical fuses with 1μs response & 52mΩ on resistance. They support 5 to 24V industrial rails in a TSOP6F package.
Bourns’ Thermal Cutoff Mini-Breakers Meet 240 W USB Power Delivery Standard
https://www.electronics-lab.com/bourns-thermal-cutoff-mini-breakers-meet-240-w-usb-power-delivery-standard/
Bourns' new SE series of 54 V mini-breaker thermal cutoff devices features a compact footprint that supports the 240 W USB Power Delivery standard, enabling overtemperature protection in USB-C connectors.
INA381A1 Overcurrent detection circuit
https://www.electronics-lab.com/ina381a1-overcurrent-detection-circuit/
Sample overcurrent detection circuit from Texas Instruments. Click link below to download PDF. This is a unidirectional current sensing solution generally referred to as overcurrent protection (OCP) that can provide an overcurrent alert signal to shut off a system for a threshold current and re-engage the system once the output drops below a desired voltage […]
Over Current Protection Switch
https://www.electronics-lab.com/current-protection-switch/
Current Sensing Switch is designed to operate a Relay Contact when there is a DC current through the sense resistor exceeds the set point, Set point adjustable from 1A to 3Amp using on board potentiometer. This circuit can offer over current protection to your project. Specifications Input: 12 VDC Range: 1 to 3 A selectable […]
Hardware Protection – OverVoltage and OverCurrent
https://www.electronics-lab.com/hardware-protection-overvoltage-and-overcurrent/
Maurizio @ dev.emcelettronica.com discuss about the different aspects of protecting power supplies from overvoltage and overcurrent. Power processing is one of the most important aspects on electronic design. The power is unique for a typical system because it gives the system life. Before starting to make the project for a power supply we need to analyze […]