Home Community

Why diode voltage is 0.7V?

Author Topic: Why diode voltage is 0.7V?  (Read 2536 times)

tiagoft

  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
Why diode voltage is 0.7V?
« on: March 27, 2011, 11:32:50 AM »
Hello, all

Just a question (I have not found an answer for this elsewhere...):

The voltage of a silicon diode is 0.7V. This depends on many factors, including the geometry of the PN junction. My question is: there is a certain range of acceptable values for that geometry. Why the geometry that gives that 0.7V was chosen?

Tiago

Electronics-Lab.com Community

Why diode voltage is 0.7V?
« on: March 27, 2011, 11:32:50 AM »

Hero999

  • Global Moderator
  • Electronics God
  • *****
  • Posts: 2586
    • View Profile
Re: Why diode voltage is 0.7V?
« Reply #1 on: March 27, 2011, 02:29:08 PM »
Thye voltage is dependant on the temperature, current and materials.

0.7V wasn't chosen, it's due to the band gap of silicon. Germanium has a lower bandgap so the forward voltage is much lower 0.3V.

Here's a link to an experiment you can do yourself.
http://www.phys.csuchico.edu/~eayars/publications/bandgap.pdf

I do not answer private messages asking for help because no one else can: benefit from advice I may give or correct me if I'm wrong.

Please ask on the open forum if you have a question: if I know the answer, I'll be happy to help.

nolram11

  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
Re: Why diode voltage is 0.7V?
« Reply #2 on: September 12, 2011, 11:10:45 PM »
The forward-biased (junction) voltage for silicon diodes is 0.7V in most of the circuit analyses, but it can dip to as low as o.6V because of the construction of diodes is not perfect. As for germanium diodes, yes it's 0.3V when forward-biased.

dlhylton

  • Newbie
  • *
  • Posts: 1
    • View Profile
    • Email
Re: Why diode voltage is 0.7V?
« Reply #3 on: January 25, 2012, 08:38:59 AM »
The voltage drop is just based on the material used, not so much the other factors.

Silicon= 0.7v drop
Germanium= 0.3v drop

-David
www.learningaboutelectronics.com
www.allthingsdiscussed.com

V.S.ARJUN

  • Newbie
  • *
  • Posts: 1
    • View Profile
    • Email
Re: Why diode voltage is 0.7V?
« Reply #4 on: February 12, 2012, 12:59:53 AM »
BECAUSE IT IS ITS CUT IN VOLTAGE .AFTER .7 V CURRENT STARTS FLOWING AND POTENTIAL BARRIER BREAKS

Electronics-Lab.com Community

Re: Why diode voltage is 0.7V?
« Reply #4 on: February 12, 2012, 12:59:53 AM »