login
DC Motor Speed, Direction and Brake Control with NRF24L01 RF Module – Arduino Compatible
This is Arduino compatible hardware that can control a single DC motor speed, direction, and brake using an RF remote control. The project is based on an ATMEGA328 microcontroller, H-Bridge DC motor driver chip LM18201, NRF24L01 RF module, 5V Regulator, 3.3V regulator and other components. This board can drive a DC Motor up to 24V DC with a load current up to 3A. Arduino pin configuration details are provided below, the user may write their own code and use this hardware. The ATMEGA328 is the heart of the project, the LMD18201 chip drives the motor, LM317-ADJ provides 5V to the microcontroller, LM1117 3.3V regulator power the 3.3V to NRF24L01.
DC Motor Speed, Direction and Brake Control with NRF24L01 RF Module – Arduino Compatible – [Link]
RELATED POSTS
10 April, 2017 BQ25504 Solar Cell LiPo Charger
7 May, 2019 Leaked Intel roadmap reveals a 2Q launch for 10nm Ice Lake chips and Lakefield processor
19 September, 2018 Keysight Keysight UXR 110GHz BW, 256GS/s, 10-bit, 4-Channel Real-Time Oscilloscope Teardown & Experiments
27 April, 2021 FLIR Lepton 3.0 & 3.5 Micro Thermal Camera Modules
13 June, 2017 Overview of the Tektronix MSO58 8-Channel 6.25GS/s 2GHz Mixed-Signal Oscilloscope
20 February, 2020 Sonos acquires the Data-over-sound Pioneer, Chirp
