Microchip Expands 10BASE-T1S Lineup With New Transceivers and Endpoints
https://www.electronics-lab.com/news/microchip-expands-10base-t1s-lineup-with-new-transceivers-and-endpoints/
Fresh silicon pairs a compact three-pin interface with optional system-level features, letting designers connect eight or more nodes to a single shared bus.
Luckfox Lyra PLC – An Industrial Linux Controller with Dual Ethernet, CAN & RS485
https://www.electronics-lab.com/news/luckfox-lyra-plc-an-industrial-linux-controller-with-dual-ethernet-can-rs485/
Designed for industrial automation and IoT gateways, this Debian 12 device features an integrated touchscreen for local monitoring and optional PoE power.
Single Pair Ethernet: One Twisted Pair, Full Ethernet Performance
https://www.electronics-lab.com/article/single-pair-ethernet-one-twisted-pair-full-ethernet-performance/
Conventional Ethernet cabling contains four twisted pairs, but not every standard uses all four. 10BASE-T and 100BASE-TX use only two pairs: one for transmit and one for receive. 1000BASE-T is the exception: it uses all four pairs, with each pair carrying traffic in both directions simultaneously. What Single Pair Ethernet Actually Changes Single Pair […]
Brechel Raspberry Pi SPE HAT Adds 10BASE-T1S and 10BASE-T1L Networking
https://www.electronics-lab.com/news/brechel-raspberry-pi-spe-hat-adds-10base-t1s-and-10base-t1l-networking/
BE-IIS-HPP-T1S and T1L HATs bring IEEE 802.3cg Single Pair Ethernet, HAT++ stacking, isolated interfaces, and 10 Mbps networking to Raspberry Pi SBCs.
PEAK Enters Automotive Ethernet with New Media Converter
https://www.electronics-lab.com/news/peak-enters-automotive-ethernet-with-new-media-converter/
HMS Networks' PEAK brand debuts its first Automotive Ethernet device, bridging 100/1000BASE-T1 with standard Ethernet for vehicle development and test workflows
ESP32-P4-Pi Board Combines Wi-Fi 6, Ethernet, and Pi Form Factor
https://www.electronics-lab.com/news/esp32-p4-pi-board-combines-wi-fi-6-ethernet-and-pi-form-factor/
VIEWE’s dual-chip ESP32-P4 and ESP32-C6 platform targets HMI, edge AI, multimedia, and industrial IoT applications with rich multimedia and connectivity features.
iWave iG-RainboW-G69M TI AM62Lx OSM SoM with Raspberry Pi-Size Carrier Board
https://www.electronics-lab.com/news/iwave-ig-rainbow-g69m-ti-am62lx-osm-som-with-raspberry-pi-size-carrier-board/
iWave’s iG-RainboW-G69M pairs a TI AM62Lx OSM Size-SF SoM with a compact carrier board, offering dual GbE, display, USB, and Linux 6.12+ support for industrial use.
Microchip LAN866x Enables Zonal Networking with 10BASE-T1S Endpoints
https://www.electronics-lab.com/news/microchip-lan866x-enables-zonal-networking-with-10base-t1s-endpoints/
LAN866x 10BASE-T1S endpoint ICs support multidrop Ethernet and RCP, enabling centralized control, reduced cabling, and simpler sensor, lighting, and audio integration.
MuseLab nanoCH32V317: Low-Cost RISC-V Development Board with Ethernet and Dual USB
https://www.electronics-lab.com/news/muselab-nanoch32v317-low-cost-risc-v-development-board-with-ethernet-and-dual-usb/
A compact RISC-V board featuring a 144MHz CH32V317 MCU, Ethernet, dual USB, DVP, SDIO, and expansion headers, priced from $6.80 and supported by MounRiver Studio.
Microchip PIC32-BZ6 Low Power MCU Adds BLE 6.0, Thread, Matter, Touch & Motor Control
https://www.electronics-lab.com/news/microchip-pic32-bz6-low-power-mcu-adds-ble-6-0-thread-matter-touch-motor-control/
PIC32-BZ6 is a multiprotocol wireless MCU with BLE 6.0, Thread, Matter, touch sensing, motor control, CAN-FD, Ethernet for smart home and industrial devices.