POWER PLAY – Arduino based smart power monitors


https://www.electronics-lab.com/power-play-arduino-based-smart-power-monitors/

POWER PLAY are Arduino based smart power monitors that are used to measure and optimize the power consumption of battery operated devices such as smart phones. This model provides the most accurate results but requires modifying the tested device. The POWER PLAY 3.8V outputs regulated 3.8 volts are simulates the power provided by a single […]

Epson develops compact atomic oscillator


https://www.electronics-lab.com/epson-develops-compact-atomic-oscillator/

Epson has revealed a new atomic oscillator to provide a better accuracy device for telecommunication networks. This new oscillator is using a special laser and IC that are developed by Epson. Seiko Epson Corporation has developed a small, highly stable atomic oscillator, the AO6860LAN, for telecommunications networks and industrial applications. The development of the new […]

Increasing cable length in precision video applications


https://www.electronics-lab.com/increasing-cable-length-in-precision-video-applications/

Maurizio tipped us about his latest article. In this article he talks about the different ways of transmitting video signal over large distances. He writes: Traditionally, the physical environment for transmitting video signals over long distances has been the shielded coax cable. Its quality and advantages are well known, and many times designers looking for […]

XLR8: Arduino-compatible FPGA-based Application Accelerator


https://www.electronics-lab.com/xlr8-arduino-compatible-fpga-based-application-accelerator/

XLR8 has both an ATmega328 clone and custom accelerator blocks on an FPGA and uses the standard Arduino IDE for programming. XLR8 is a drop-in replacement for an Arduino Uno, but with a twist. It is an Arduino-compatible board that uses a Field-Programmable Gate Array (FPGA) as the main processing chip. The FPGA provides a […]

AVR Programmer Shield


https://www.electronics-lab.com/avr-programmer-shield/

ohneschuh @ instructables.com has build a Arduino Shield that is able to program spare ATmega328 and ATtiny85 mcu using the ISP sketch. Beside my Arduino instructables I also use pure ATmega328 and ATtiny85 microcontrollers. To program them I normally used a breadboard and the ArduinoISP setup with an Arduino UNO or NANO. But this was not the […]

HacKeyboard – open hardware mechanical keyboard


https://www.electronics-lab.com/hackeyboard-open-hardware-mechanical-keyboard/

msaleiro @ instructables.com tipped us about his latest build. This is an open source mechanical keyboard he has been working for the last 2 years. It may looks like an ordinary keyboard but it has many features embedded. To check them follow the link below. He writes: It looks like a computer keyboard, and it […]

ESP8266 – 5$ internet connected switch


https://www.electronics-lab.com/esp8266-5-internet-connected-switch/

EasyIoT @ instructables.com shows us how to build an Internet connected switch using ESP8266 Wifi module and EasyIoT Cloud service. In this tutorial we will show how to build WiFi internet connected switch connected to EasyIoT Cloud. We will use ESP8266, solid state relay and Arduino IDE. Switch can be controlled by WEB application, native Android […]

Save space on your PCB with TRACOPOWER!


https://www.electronics-lab.com/save-space-on-your-pcb-with-tracopower/

TMLM family of 4-20W AC/DC power supply is the right solution on most important requirements – constraint space, high efficiency and cost saving. Every square inch of your PCB costs money. It is a fact, and if you can reduce your PCB´s area, you actually save money. Moreover if you use a high efficiency power […]

Build a Simple Toaster Oven Temperature Profile Controller


https://www.electronics-lab.com/build-a-simple-toaster-oven-temperature-profile-controller/

Maurizio @ dev.emcelettronica.com has tipped us about his latest project. In this article he discuss how to build a simple toaster oven temperature profile controller using StickOS and CPUStick. This is the first part of the article. Using a highly-integrated microcontroller running “StickOS BASIC”, it is possible to quickly build a toaster oven temperature profile controller for performing […]

ESP8266 DIY Wifi Smoke Alarm Notifier


https://www.electronics-lab.com/esp8266-diy-wifi-smoke-alarm-notifier/

simpleiothings.com has build a Wifi connected smoke alarm using ESP8266 module: This tutorial will teach you how to build a Wifi Smoke Alarm Notifier for about $10 dollars. You won’t have to code anything, and you won’t have to solder or buy expensive electronics equipment. Any services you are asked to use will be 100% […]