Electric Potential In Uniform Fields
https://www.electronics-lab.com/article/an-overview-on-electrostatics-electric-potential-in-uniform-fields/
Electric Field Due To Uniformly Distributed Charges Let’s consider a configuration of two nonconducting planes that are oppositely charged and placed in parallel to each other at a small distance. Suppose that the positive and negatively charged planes are set up facing each other. Figure 1 shows part of two infinitely large, nonconducting plane sheets […]
Unlock High-Frequency Oscilloscope Signals with James Wilson’s 2GHz Active Probe
https://www.electronics-lab.com/unlock-high-frequency-oscilloscope-signals-with-james-wilsons-2ghz-active-probe/
James Wilson’s 2GHz active probe offers a breakthrough in open-source design, achieving a flat frequency response with easily accessible components. This probe is a valuable tool for electrical engineers seeking affordable, high-performance signal acquisition. Oscilloscopes are essential for circuit debugging and characterization, but the quality of the signal fed into them is crucial. A creative […]
PicoQuake Vibration Sensor – An Open Source Device built Around Raspberry Pi’s RP2040 MCU
https://www.electronics-lab.com/picoquake-vibration-sensor-an-open-source-device-built-around-raspberry-pis-rp2040-mcu/
PicoQuake Vibration Sensor is a sensor that is designed to measure a wide range of frequencies, making it suitable for monitoring everything from swaying buildings to vibrating machinery. The unique thing about this sensor is that it’s open-sourced and can operate via a USB as a standalone device. PicoQuake, a new vibration sensor from Slovenian […]
Banana Pi BPI-Centi-S3 is A ESP32-S3 Powered Dev Board with 1.9-inch TFT Display
https://www.electronics-lab.com/banana-pi-bpi-centi-s3-is-a-esp32-s3-powered-dev-board-with-1-9-inch-tft-display/
Banana Pi BPI-Centi-S3 is an ESP-32 S3-powered dev board with a 1.9-inch color TFT display, a rotary encoder, and a WS2812B NeoPixcel LED. GPIO and much more. These features make this board similar to the LILYGO T-Panel, LILYGO T4 S3, T-Display-S3-Long, and other display products that we have covered in our previous posts. The board […]
Smart building applications with the new reComputer R1025-10
https://www.electronics-lab.com/smart-building-applications-with-the-new-recomputer-r1025-10/
Quick Facts The reComputer R1000 is a powerful and ready-to-deploy edge IoT controller built on the Raspberry Pi CM4 platform. It features a quad-core processor for efficient operation and supports flexible configurations with 3 isolated RS485, dual Ethernet, optional wireless connectivity (4G, LoRa®, Wi-Fi/BLE, Zigbee), multiple communication protocols, and pre-configured firmware. Ideal for smart building […]
Milk-V Meles SBC has Power for Video Processing
https://www.electronics-lab.com/milk-v-meles-sbc-has-power-for-video-processing/
The current popularity of SBCs for complex applications in medical imaging, drones, and home robotics urges a discussion of MilkV’s Meles. Based on the TH1520A, Meles is equipped with a Quad Core RISC-V 64GCV C910 channeling video processing prowess. Despite being the size of a credit card, Meles is equipped with a range of high-performance […]
Raspberry Pi M.2 HAT+ with a Hailo AI acceleration module for use with Raspberry Pi 5
https://www.electronics-lab.com/raspberry-pi-m-2-hat-with-a-hailo-ai-acceleration-module-for-use-with-raspberry-pi-5/
The present-day prevalence of AI vision applications has urged even Raspberry Pi to create its own AI development kit. The company recently announced the launch of its new Raspberry Pi AI kit, in collaboration with Hailo. Each Raspberry Pi AI AI Kit comes with a pre-installed AI module, ribbon cable, GPIO stacking header, and mounting […]
Argon ONE V3 M.2 NVMe Case Improves Raspberry Pi 5
https://www.electronics-lab.com/argon-one-v3-m-2-nvme-case-improves-raspberry-pi-5/
MPUs fulfill the ever-growing demands and needs of IoT and embedded applications. However, these MPUs are built for specific uses, and they do not exhibit expansion for future scopes. Several extensions are employed to meet these needs. One of these extensions is launched by Argon40, a case for the Raspberry Pi 5– the Argon ONE […]
The Pi5 Connector supports Raspberry Pi5 and Pi4B
https://www.electronics-lab.com/the-pi5-connector-supports-raspberry-pi5-and-pi4b/
Transmission of audio and visual signals without distortion plays a significant role in communication and electronic systems. While efficient devices are required for such transmission, the interfacing of the development board is not achieved easily. For this purpose, connector adapter boards are being used, and the “new” Pi 5 adapter board, which is compatible with […]
Ochin CM4V2: Tiny Carrier Board V2 for Raspberry Pi CM4
https://www.electronics-lab.com/ochin-cm4v2-tiny-carrier-board-v2-for-raspberry-pi-cm4/
The industrial setting often calls for advanced performance while minimizing the circuit size. As Ochin V1 is reaching its end of life (EOL), Ochin v2 is a new mini carrier board for Raspberry with numerous advanced features over its preceding version. The Ochin CM4v2 is a compact Raspberry Pi Compute Module carrier board, boasting a […]