DueProLogic – USB-CPLD Development System
https://www.electronics-lab.com/dueprologic-usb-cpld-development-system/
The DueProLogic is a complete FPGA Development System designed to easily get the user started learning and creating projects. The DueProLogic makes programmable logic easy with an all inclusive development platform. It includes an Altera Cyclone IV FPGA, on board programming, four megabit configuration flash, and an SD connector for add on memory. You can […]
AT89SXX Development Board
https://www.electronics-lab.com/at89sxx-development-board/
Our AT89Sxx Development Board provides a very simple and cost effective prototyping platform. The compact design provides connection to all the pins of the microcontroller for the user. Features Prototyping solution available for 40-pin AT89xx series microcontroller from ATMEL All the four ports available to the user via standard 10 pin box header with supply […]
40 PIN & 28 PIN PIC18F USB Development Board
https://www.electronics-lab.com/40-pin-28-pin-pic18f-usb-development-board/
PIC18F USB Development Board will help you with your prototyping requirement with any 28/40-pin Microchip microcontroller supporting USB interface . The board has been tested using PIC18F4550 40 Pin & PIC18F2550 28 Pin Microcontrollers. Features All ports terminating in separate Box Header with 5 VDC source option ICSP connector for programming for the PIC’s with […]
18 PIN PIC Development Board with Header IO
https://www.electronics-lab.com/18-pin-pic-development-board-header-io/
PIC16F 18-pin Development Board will help you with your prototyping. It works with any of Microchip’s 18 pin of 16F PIC microcontroller. Features All ports terminating in separate box header with 5 VDC source option ICSP connector for programming for the PIC’s with ICD support Jumper selectable on board pull up resistor for PortA.4 pin […]
Make your own Attiny2313 development board
https://www.electronics-lab.com/make-development-board/
In this tutorial you will learn how to build a basic development board for Attiny2313 microcontrollers. Did you ever want to make your own development board with microcontroller and you didn´t know how .In this instructable I will show you how to make it.All you need is knowledge in electronics, designing circuits and programming. Make […]
Development board for PIC16F1938
https://www.electronics-lab.com/development-board-pic16f1938/
Raj over at Embedded Lab has designed a development board for PIC16F1938: The PIC16F1938 is a versatile 28-pin MCU belonging to Microchip’s extreme low power microcontroller family featuring nanoWatt XLP technology, 28KB of programming memory, 1KB of RAM, 11 ADC channels, and tons of other peripherals. A while ago, I designed a development board for this MCU and […]
USBuddy: USB development tool
https://www.electronics-lab.com/usbuddy-usb-development-tool/
Jakub has designed and built a USB breakout board with current monitor – USBuddy: Do you sometimes develop with USB? I do. So I need to access data lines, bus voltage and I’d like to easily monitor the current too. I made myself a small companion (43.5 mm × 22.5 mm, 9.5 g) to do […]
Atmel SAM D09 Development board
https://www.electronics-lab.com/atmel-sam-d09-development-board/
Dan Watson has designed a development board for the Atmel SAM D09 microcontroller: The Atmel SAM D series of 32-bit microcontrollers includes several devices, each with a long list of features at great prices. Perhaps the best known of the series in the maker community is the SAM D21 due to its use on the […]
Six boards for rapid IoT development
https://www.electronics-lab.com/six-boards-for-rapid-iot-development/
Robert Thompson @ nxp.com blog discuss about six IoT developement boards that are good start points on the field. Established companies and emerging start-ups are putting a stake in the Internet of Things ground, an opportunity with estimates of 50 billion devices connected by 2020. Standing in the way for many companies is the increasing […]
PlatformIO – open source ecosystem for IoT
https://www.electronics-lab.com/platformio-open-source-ecosystem-for-iot/
PlatformIO is an open source integrated development environment for the IoT world. It comes with an IDE which allows you rapid embedded system development and with library manager which organizes hundreds of the most popular libraries. It’s cross platform without external dependences and supports 200+ embedded boards, 15+ development platforms, 10+ frameworks. Check it out on […]