NBIOT/LTE-M1 Air Monitor: ESP32-S3-WROOM-1 and SIM7080G with GNSS for Greenhouse Monitoring
https://www.electronics-lab.com/nbiot-lte-m1-air-monitor-esp32-s3-wroom-1-and-sim7080g-with-gnss-for-greenhouse-monitoring/
The NBIOT/LTE-M1 Air Monitor uses an ESP32-S3-WROOM-1 controller and a SIM7080G module for cellular data transmission. It monitors temperature, humidity, CO2 levels, TVOC, and light intensity. The device is powered by an internal 18650 LiPo battery, charged by a solar panel with MPPT CN3791 for efficient power management. Designed for greenhouse monitoring, it uses low-power […]
LILYGO’s T-TWR REV2.1 – An ESP32-Based Walkie Talkie Development Board with GPS Functionality
https://www.electronics-lab.com/lilygos-t-twr-rev2-1-an-esp32-based-walkie-talkie-development-board-with-gps-functionality/
LILYGO’s T-TWR REV2.1 can be considered an ESP32-S3-based development board with built-in Walkie-Talkie features. Because the board is built around an EPS32-S3 it already has Wi-Fi and Bluetooth capabilities. With the addition of another GPS module, this becomes very useful for developing portable communication devices, asset-tracking solutions, and other outdoor applications that require location awareness. […]
Makerfabs ESP32-S3 Based NBIOT/LTE-M Air Monitor with Solar Charging is Designed for Remote Environmental Monitoring
https://www.electronics-lab.com/makerfabs-esp32-s3-based-nbiot-lte-m-air-monitor-with-solar-charging-is-designed-for-remote-environmental-monitoring/
Macakerfabs has recently introduced an Air Monitor with NBIOT and LTE-M named NBIOT/LTE-M Air Monitor, the module uses an ESP32-S3 with SIM7080G for remote environmental monitoring. The device can measure environmental parameters like temperature, humidity, CO2, TVOC, and light intensity sensors and can send data through a low-power wide-area network (LPWAN). The most interesting thing about […]
Waveshare ESP32-S3-Touch-LCD-4.3B: Featuring Xtensa LX7 Dual-Core Processor and ESP32-S3 SoC
https://www.electronics-lab.com/waveshare-esp32-s3-touch-lcd-4-3b-featuring-xtensa-lx7-dual-core-processor-and-esp32-s3-soc/
The Waveshare ESP32-S3-Touch-LCD-4.3B is a flexible development board built on the ESP32-S3 SoC with RS485, CAN Bus, I2C, and isolated DIO interfaces via terminal block. It has a 4.3-inch capacitive touchscreen with a resolution of 800×480. The board includes a 32-bit dual-core Xtensa LX7 processor (up to 240 MHz), 16 MB of flash storage, and […]
LILYGO’s T-Glass: A Low-Cost Espressif ESP32 Platform for Head-Up Display Projects
https://www.electronics-lab.com/lilygos-t-glass-a-low-cost-espressif-esp32-platform-for-head-up-display-projects/
LILYGO has announced the T-Glass, a new device designed to simplify the development of head-up displays for wearable projects. This innovative kit is powered by the Espressif ESP32-S3 chip and has features that offer significant value for wearable technology enthusiasts. The new kit, brought to our attention by Linux Gizmos, is designed to provide a low-cost […]
SB Components StackyFi A ESP32-S3 Board in Raspberry Pi Zero From Factor
https://www.electronics-lab.com/sb-components-stackyfi-a-esp32-s3-board-in-raspberry-pi-zero-from-factor/
SB Components StackyFi is an ESP32-S3 powered development board in a Raspberry Pi Zero Form Factor. The board features a 40-pin GPIO header which is compatible with most Raspberry Pi HAT. The board also has dual USB-C ports (one native, one for serial debugging), an IMU sensor, an RGB LED, and Boot/Reset buttons. The board […]
LILYGO’s T3-S3 ESP32-S3 Board is Suited for IoT Applications
https://www.electronics-lab.com/t3-s3-esp32-s3/
The IoT industry is constantly looking for improvements in boards that fixate on communication interfaces and low-power performance. We recently came across LILYGO’s T3-S3 ESP32-S3 board which can be lauded for its long-distance communication capabilities and energy efficiency. Key Specifications and Features The T3-S3 ESP32-S3 board uses the SX1280 LoRa Transceiver for communication which operates […]
Espressif Thread Border Router Supports IPv6, Service Discovery, and NAT64
https://www.electronics-lab.com/espressif-thread-border-router-supports-ipv6-service-discovery-and-nat64/
Espressif Thread Border Router is a SP32-H2 (802.15.4) and ESP32-S3 (WiFi + BLE) powered development board that has acquired Thread Interoperability Certificate V1.3, which makes it a Thread-Certified Component that supports Matter application scenarios. The ESP Thread Border Router supports the latest Thread 1.3 standard, including features like IPv6 connectivity, service discovery, multicast forwarding, and […]
LILYGO T-Energy-S3 ESP32-S3 Dev Board Features An 18650 Battery Holder
https://www.electronics-lab.com/lilygo-t-energy-s3-esp32-s3-dev-board-features-an-18650-battery-holder/
LILYGO T-Energy-S3 is an ESP32-S3 WiFi and Bluetooth-enabled IoT development board with an 18650 battery holder, a USB-C port for charging and programming, and plenty of I/Os thanks to two 20-pin GPIO headers and a Qwiic connector. The main attraction of this board is its 18650 battery holder which this dev board can be used […]
LILYGO T-Glass IS A Google Glass Like Smart Glass Powered by an ESP32-S3
https://www.electronics-lab.com/lilygo-t-glass-is-a-google-glass-like-smart-glass-powered-by-an-esp32-s3/
LILYGO® T-Glass AR is an ESP32-S3-powered smart glasses with a smart Bosch AI IMU. The Bosch IMU is an AI smart sensor that integrates a 6-axis IMU, a 32-bit customizable programmable microcontroller, and various software functionalities. With these functionalities, this can be used in applications like navigation, machine learning analytics, and orientation estimation. All the main […]