50V – 10A Bidirectional DC Motor Driver Using A3941
https://www.electronics-lab.com/50v-10a-bidirectional-dc-motor-driver-using-a3941/
This tiny board designed to drive bidirectional DC brushed motor of large current. DC supply is up to 50V DC. A3941 gate driver IC and 4X N Channel Mosfet IRLR024 used as H-Bridge. The project can handle a load up to 10Amps. Screw terminals provided to connect load and load supply, 9 Pin header connector […]
16X2 LCD Shield with LMD18201 Motor Driver
https://www.electronics-lab.com/16x2-lcd-shield-lmd18201-motor-driver/
LCD is very important part of many DIY and industrial projects. The 16X2 LCD shield has been designed to develop LCD related projects using 28-40 Pin Pic development board or DSpic development board, along with LCD this shield includes LMD18201 DC Motor driver , 2 Trimmer potentiometer and 4 tact switches with jumpers. Jumpers […]
Inteligent Power Module (IPM) Board for Brushless Motors
https://www.electronics-lab.com/inteligent-power-module-ipm-board-brushless-motors/
Intelligent Power Module (IPM) board has been designed using FSBS5CH60 IC from Fairchild, which provides a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, […]
4 Wheel Robot Motor Driver ( 4X 3Amps LMD18201 H-Bridge)
https://www.electronics-lab.com/4-wheel-robot-motor-driver-4x-3amps-lmd18201-h-bridge/
This compact board will help you to drive 4 Wheel Drive Robots, each axis can handle a load current up to 3 Amps and supply 12V – 48 V DC. Board requires two PWM and Dir. signals for full 4WD operations, mainly differential steering for taking turns left or right or complete 360 degree rotation. […]
4.5A H-Bridge DC Motor Driver Module Using TB6549HQ
https://www.electronics-lab.com/4-5a-h-bridge-dc-motor-driver-module-using-tb6549hq/
The H-Bridge Motor Driver Module Based on TB6549HQ IC from Toshiba, is a full-bridge driver IC for DC motors that uses an LDMOS structure for output transistors. High-efficiency drive is possible through the use of a MOS process with low ON-resistance and a PWM drive system. Four modes, CW, CCW, short brake, and stop, can […]
2X L298 Dual DC Motor Driver Board for Robots
https://www.electronics-lab.com/2x-l298-dual-dc-motor-driver-board-robots/
2x L298 H-Bridge Dual Motor driver project can control two DC motors connected to it. The circuit is designed around popular dual H-Bridge L298 from ST. Motor supply 7V To 46V DC, Load 2Amp Each Channel. Features Motor supply V2: 7 to 46 VDC Logic Supply V1 : 5V DC Input Signal: Enable, Dir. , […]
DC Motor & Direction Controller with Brake using MC33035
https://www.electronics-lab.com/dc-motor-direction-controller-brake-using-mc33035/
This is a 3AMP DC Motor speed and direction controller using MC33035 IC from on semiconductor, though the MC33035 was designed to control brushless DC motor , it may also be used to control DC brush type motors. MC33035 driving a Mosfets based H-Bridge affording minimal parts count to operate a brush type motor. On […]
Sonicare toothbrush teardown: microcontroller, H bridge, and inductive charging
https://www.electronics-lab.com/sonicare-toothbrush-teardown-microcontroller-h-bridge-inductive-charging/
Ken Shirriff did a teardown of a Sonicare electric toothbrush: The photos below show the top and bottom of the toothbrush internals. I expected to find a simple, low-cost mechanism, so I was surprised at how much complexity there was inside. The vibration mechanism (right) is built from multiple metal and plastic parts screwed together, requiring […]
5 Amp H-Bridge DC Motor Driver using MC33886
https://www.electronics-lab.com/5-amp-h-bridge-dc-motor-driver-using-mc33886/
This tiny module has been designed to use in Robotics, Power tools, automotive applications. The module based on MC33886 from NXP, MC33886 is a monolithic power IC comprising control logic, charge pump, gate drive, and low RDS(ON)MOSFET output H-Bridge circuitry in a small surface mount package. MC33886 is a monolithic h-Bridge ideal for fractional horsepower […]
Dual DC Motor Driver For Robot with L298
https://www.electronics-lab.com/dual-dc-motor-driver-robot-l298/
Dual Motor L298 H-Bridge Control project can control two DC motors connected to it. The circuit is designed around popular dual H-Bridge L298 from ST. This board can be configured to drive a single motor with high current rating also. This can be achieved with the help of jumpers on the board. An onboard 5V […]