Clintech Pico Packs 48 GPIOs in Raspberry Pi RP2354B Board
https://www.electronics-lab.com/clintech-pico-packs-48-gpios-in-raspberry-pi-rp2354b-board/
A compact RP2354B-based board with full 48 GPIO breakout, USB-C, dual-core Arm/RISC-V support, and 2MB flash, designed for flexible embedded development.
Renesas RA6W1 and RA6W2 MCUs Bring Dual-Band Wi-Fi 6 to IoT
https://www.electronics-lab.com/renesas-ra6w1-and-ra6w2-mcus-bring-dual-band-wi-fi-6-to-iot/
Renesas RA6W1 RA6W2 MCUs combine Wi-Fi 6, Bluetooth LE, Cortex-M33, and Matter support for smart home and low-power IoT devices.
GigaDevice’s GD5F1GM9 Series High-Speed QSPI NAND Flash Sets New Benchmark with Breakthrough Read Speeds for Accelerated Application Startup
https://www.electronics-lab.com/gigadevices-gd5f1gm9-series-high-speed-qspi-nand-flash-sets-new-benchmark-with-breakthrough-read-speeds-for-accelerated-application-startup/
GigaDevice, a leading semiconductor company specializing in Flash Memory, 32-bit Microcontrollers (MCUs), Sensors, Analog products and solutions, announces the launch of its GD5F1GM9 high-speed QSPI NAND Flash, which features breakthrough read speeds and innovative Bad Block Management (BBM) functionality. The GD5F1GM9 series combines the high-speed read performance of NOR Flash with the large capacity and […]
uCOM Carrier Board: Versatile Baseboard for i.MX RT/6/7/8/9 SoCs with Advanced Interface Support
https://www.electronics-lab.com/ucom-carrier-board-versatile-baseboard-for-i-mx-rt-6-7-8-9-socs-with-advanced-interface-support/
The uCOM Carrier Board serves as a baseboard designed to support a wide range of interfaces defined by the EAuCOM standard. This standard, developed by Embedded Artists, is built around i.MX RT/6/7/8/9 SoCs. An EAuCOM board typically integrates the i.MX RT/6/7/8/9 SoC along with essential components such as external SDRAM, Flash memory, power management, Ethernet […]
LILYGO T-Display S3 AMOLED Plus: ESP32-S3R8-Based IoT Development Board with RM67162 Display Controller
https://www.electronics-lab.com/lilygo-t-display-s3-amoled-plus-esp32-s3r8-based-iot-development-board-with-rm67162-display-controller/
The LILYGO T-Display S3 AMOLED Plus is a development board designed for IoT and embedded system applications. It features a 1.91-inch RM67162 IPS AMOLED display with a 240×536 resolution, capacitive touch support, and a QSPI interface for creating interactive user interfaces. The display has an active area of 19.8×44.22mm and utilizes an RM67162 driver IC […]
OMGS3 is a Compact yet Fully Functional ESP32-S3 Module
https://www.electronics-lab.com/omgs3-is-a-compact-yet-fully-functional-esp32-s3-module/
The OMGS3 is a compact, fully-featured ESP32-S3-PICO board from the Unexpected Maker. With its dual-core architecture and QSPI memory, it can effortlessly handle more than one task at a time. It has wireless connectivity supporting Wifi, Bluetooth, and an Onboard High Gain Antenna. The Architecture of the OMGS3 Board The Xtensa LX7 Core is designed […]
Raytac AN7002Q Wi-Fi 6 module
https://www.electronics-lab.com/raytac-an7002q-wi-fi-6-module/
Raytac’s AN7002Q is a low-power Wi-Fi 6 module series perfect for applications like industrial automation, smart homes, healthcare, and more. It uses Nordic Semiconductor’s nRF7002 chipset and works seamlessly with Raytac’s Bluetooth LE modules for dual-band connectivity. Key features of this module include support for 2.4 GHz and 5 GHz bands, data rates up to […]
LILYGO’s Upgraded T-Display-S3 AMOLED for $25.68 USD
https://www.electronics-lab.com/lilygos-upgraded-t-display-s3-amoled-for-25-68-usd/
The T-Display-S3 AMOLED is a development board and is an updated version of the T-Display-S3 and has the first combination of an ESP32-S3 with an AMOLED display. The previous LCD display has been replaced with an AMOLED one, which results in an improved color display. In addition, it now features a QSPI interface instead of […]
Say “Hello” The New Feather-Compactible OrangeCrab Board
https://www.electronics-lab.com/say-hello-new-feather-compactible-orangecrab-board/
Owing to the trend that is driving the success of the Feather form factor for boards is the change in the methodology and languages in which boards are now being programmed. It is quite certain that the maker market is in its transition state and it is hard to tell what the next interesting thing […]