Scout ESC, A New Tank Controller Board By Open Panzer
https://www.electronics-lab.com/scout-esc-new-tank-controller-board-open-panzer/
Open Panzer Project is an attempt to create open source versions of all electronics used in RC tanks today, with professional quality and features. The goal of this project is to expand the hoppy and to improve everyone’s experience of RC tanking corner, which will speed-up its growing. Open Panzer recently developed the Scout ESC […]
Ultra-low dropout, wide input range 150mA regulator
https://www.electronics-lab.com/ultra-low-dropout-wide-input-range-150ma-regulator/
Graham Prophet @ eedneurope.com presents the latest ultra-low dropout regulators from Diodes Inc: The AP7380 series of ultra-low dropout regulators (Diodes Inc.) operates from an up-to-24V input voltage range and offers fixed output voltage options, in USB power, portable equipment, consumer, instrumentation and metering applications. Ultra-low dropout, wide input range 150mA regulator – [Link]
Tune Your String Instruments Perfectly With Roadie Tuner
https://www.electronics-lab.com/tune-string-instruments-perfectly-roadie-tuner/
Roadie Tuner is a dream come true for guitarists! The automatic ring tuner, that is quick, easy to use, and three times more accurate than the human ear, is dedicated to beginner guitarists who are almost always frustrated with not knowing how to tune their guitar. This ultimate musician’s tool works on all string instrument to fine tune them […]
How to Build a Bi-Fuel (LPG & Unleaded) Trip Computer Using Arduino
https://www.electronics-lab.com/build-bi-fuel-lpg-unleaded-trip-computer-using-arduino/
Nikos Stavrou @ instructables.com build a bi-fuel trip computer using arduino and has a detailed tutorial on it. The computer can measure both LPG and unleaded fuel consumption. He writes: The main reason I made this project is the lack of a trip computer that is designed for LPG powered cars. I named it Bi-TripCo […]
A simple and reliable programming & test jig
https://www.electronics-lab.com/simple-reliable-programming-test-jig/
Pieter @ piconomix.com tipped us with his latest build. Check it out on the link below. I recently had to create a programming jig for an ATmega328PB based board. 1mm diameter test pads were placed on the bottom of the PCB to give access to the ISP pins. Normally one would add two 3mm diameter […]
Easily Design HMI For Your LCD Projects With Nextion
https://www.electronics-lab.com/design-hmi-projects-easily-nextion/
Nextion display by ITead allows users to design their own interfaces all by themselves, even if they don’t have any coding background knowledge and can go with different platforms. This tool is the best solution to replace traditional TFT LCD and LED Nixie tube. Customers can use the software – Nextion Editor to design interfaces. With the new capacitive […]
Carbon Introduces SpeedCell System & Bigger 3D Printers
https://www.electronics-lab.com/carbon-introduces-speedcell-system-bigger-3d-printers/
Since 2013, the additive manufacturing startup Carbon had altered the 3D printing industry. Carbon produced its industry-changing M1 3D printer and CLIP 3D printing technology, bringing never-before-seen printing speed and end-use-quality polymer parts to the market. Today Carbon is on a mission to help manufacturers and designers cut their costs, waste less energy and materials […]
USB Curve Tracer
https://www.electronics-lab.com/usb-curve-tracer/
A small and inexpensive USB-based curve tracer used for troubleshooting electronics in the style of the Huntron Tracker 2000. by Jason Jones: This documents a USB-based curve tracer based on the PIC24FV16KM202, which is a modest 16-bit microcontroller. The board uses a PC screen OR an oscilloscope in XY mode as a display and may […]
Coilcraft.com – Power inductor selection tool adds performance data
https://www.electronics-lab.com/coilcraft-com-power-inductor-selection-tool-adds-performance-data/
By Graham Prophet@ edn-europe.com: Coilcraft has written a Power Inductor Selection Tool that allows users to easily select the appropriate path for their particular search while also providing more application-specific performance data than previously available. Coilcraft.com – Power inductor selection tool adds performance data – [Link]
Add OLED Display To Your Projects With TeensyView
https://www.electronics-lab.com/add-oled-display-projects-teensyview/
The Teensy is a complete USB-based microcontroller development system, in a very small footprint, capable of implementing many types of projects. All programming is done via the USB port. You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino […]